A

Adams, Andrew R.

• Seismic Evaluation - Walls: Comparison of In-plane Lateral Load Resistance of Interior Steel Stud and Wood Stud Light-Frame Walls
  (View Abstract)

Adams, Beverley J.

• Remote Sensing for Condition Assessment and Damage Identification: Remote Sensing and Field Reconnaissance for Rapid Damage Detection in Hurricane Katrina
  (View Abstract)
• Wind or Water? (Separating Wind and Storm-Surge Damage in Hurricanes): Use of Emerging Remote-Sensing Technologies to Determine Neighborhood Wind/Water Damage Patterns
  (View Abstract)

Adan, Scott M.

• Connections and Detailing - 2: Inelastic Cyclic Testing of the Kaiser Bolted Bracket Moment Connection
  (View Abstract)

Agarwal, Anil

• Fire Behavior and Design of Steel and Composite Structures: BEHAVIOR OF STEEL BUILDING STRUCTURES UNDER REALISTIC FIRE LOADING
  (View Abstract)
• Design for Structural Fire Safety: Modeling the Behavior of Structural Columns under Fire Loading Effects
  (View Abstract)

Agarwal, Puneet

• Risk, Reliability, and Safety in the Offshore Environment: Reliability Analysis and Design Procedures for Offshore Wind Turbines
  (View Abstract)

Aghmashei, GholamHosein

• Poster Session I: The Effect of Soil-Structure Interaction in 14-story Building Retrofitting Project of National Housing and Land Organization
  (View Abstract)

Agrawal, Anil

• Utilization of Non Destructive Testing (NDT) Methods in Structural Health Monitoring (SHM): Deterioration Rates for Bridge Components in New York
  (View Abstract)
• Remote Sensing for Condition Assessment and Damage Identification: Remote Monitoring on Internal Condition of Buried Pipe Infrastructures
  (View Abstract)

Ahmad, Jameel

• Poster Session I: A Novel Structure to Protect Against Explosive Loads
  (View Abstract | View Presentation)

Ahmadizadeh, Mehdi

• Validation and Verification of Hybrid Simulation for Seismic Structural Response: Assessment of Numerical and Experimental Errors in Hybrid Simulation
  (View Abstract)

Ahsan, Kareem

• Damping in Buildings: Measurements, Uncertainty, and Application: Uncertainty in Damping and Damping Estimates: An Assessment of Databases and Data from Recent Full-Scale Measurements
  (View Abstract)

Akira, Kawaguchi

• Remote Sensing for Condition Assessment and Damage Identification: Remote Monitoring on Internal Condition of Buried Pipe Infrastructures
  (View Abstract)

Aktan, A. Emin

• Structural Identification of Constructed Systems for Evaluation of Performance: An Integrated Approach by the ASCE Committee
  (View Abstract)

Al-Sayegh, Ammar

• Advances in Software Development for Structural Engineering Applications: A New Parallel Structural Analysis Framework
  (View Abstract)

Alampalli, Sreenivas

• Utilization of Non Destructive Testing (NDT) Methods in Structural Health Monitoring (SHM): Suitability of Non Destructive Testing (NDT) Methods for Structural Health Monitoring (SHM) of Civil Infrastructures
  (View Abstract)
• Remote Sensing for Condition Assessment and Damage Identification: Review of Remote Sensing for Condition Assessment and Damage Identification after Extreme Loading Conditions
  (View Abstract)

Alavi, Babak

• Large Structures: PERFORMANCE-BASED SEISMIC DESIGN OF AN INDUSTRIAL STORAGE RACK SYSTEM
  (View Abstract)

Allen, Don

• Sustainability for Structural Engineers: Material Industry Perspectives: The Structural Engineer's Role in Selecting Sustainable Materials: The Steel Industry's Perspective
  (View Abstract)

Alsamsam, Iyad M.

• Sustainability for Structural Engineers: Material Industry Perspectives: Sustainable High Performance Concrete Buildings
  (View Abstract | View Presentation)

Aly Sayed Ahmed, Aly M.

• Poster Session I: Active Control in a High-Rise Building under Multidirectional Wind Loads
  (View Abstract | View Presentation)

Aminmansour, Abbas

• High Rise Buildings - Session 2: Integrated Design and Construction of Tall Building
  (View Abstract | View Presentation)

Amoroso, Samuel D.

• Lessons from Recent Windstorms: A Rational Benefit/Cost Approach for Evaluating Structural Mitigation for Wind Damage: Learning
  (View Abstract)
• Wind or Water? (Separating Wind and Storm-Surge Damage in Hurricanes): Effective Forensic Engineering Investigations of Hurricane
  (View Abstract)

Ando, Hirotaka

• Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Experiments Utilizing Multipurpose Test-Bed
  (View Abstract)

Andrawes, Bassem

• Seismic Design of Bridges: Seismic Retrofit of Bridge Columns using Innovative Wrapping Technique
  (View Abstract)

Andrews, Blake M.

• General Seismic - Analysis: Ductility Capacity Models for Buckling-Restrained Braces using a Bayesian Methodology
  (View Abstract | View Presentation)

Apanasovich, Tatiyana V.

• Network Infrastructure Performance for Extreme Winds: Estimating Electric Power Outages due to Hurricane and Ice Storms Using Spatial Generalized Linear Mixed Models
  (View Abstract)

Araki, Yoshikazu

• Poster Session I: Vertical Vibration Isolation Device using Constant Load Supporting Mechanism
  (View Abstract)

Asai, Takehiko

• Poster Session I: Vertical Vibration Isolation Device using Constant Load Supporting Mechanism
  (View Abstract)

Asakawa, Takeshi

• Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Experiments Utilizing Multipurpose Test-Bed
  (View Abstract)

ASTANEH-ASL, Abolhassan

• Steel Shear Wall Systems-Recent Experimental and Analytical Studies: Experimental and Analytical Studies of a Steel Plate Shear Wall System
  (View Abstract | View Presentation)
• Steel Shear Wall Systems-Recent Experimental and Analytical Studies: Lateral Stiffness of Steel Shear Wall Systems
  (View Abstract)

AYDOGMUS, Taner

• Large Structures: Large Constructions and Bridge Abutments: Solutions with Geosynthetic Reinforced Earth
  (View Abstract)

Aynsley, Richard M.

• Introduction to the new ASCE Technical Council on Wind Engineering: Background to the Environmental Wind Engineering Committee of TCWE
  (View Abstract | View Presentation)

Ayoub, Ashraf S.

• Poster Session I: Mixed Formulation for Seismic Analysis of Composite Frame Elements
  (View Abstract)

Aziz, EL-Sayed

• Computational Aspects in Distance Education: IT-Enhanced Laboratory Experience within a Mechanical Engineering Undergraduate Curriculum
  (View Abstract | View Presentation)

B

Bagchi, Ashutosh

• Design for Structural Fire Safety: Structural performance of stud walls under normal and post-earthquake fire exposure
  (View Abstract)

Bai, Jong-Wha

• General Seismic - Analysis: SEISMIC FRAGILITY ANALYSIS OF TYPICAL LOW- TO MID-RISE REINFORCED CONCRETE STRUCTURES
  (View Abstract | View Presentation)

Baker, William F.

• Pushing the Envelope in Material and Structural System Choice in High-Rise Buildings: Specifying High Performance Concrete for the Trump Tower Chicago
  (View Abstract)

Bakht, Bilal

• CSCE: The Confederation Bridge - The First 10 Years of Service: Wind Engineering for the Confederation Bridge
  (View Abstract)

Bank, Larry C.

• Timber Bridge Design Issues: Feasibility of rehabilitating timber bridges using mechanically fastened FRP strips
  (View Abstract)

Banks, David

• Design of Structures for Wind Using Computational Methods: Pulp CFD: Hollywood, the Elephant, and the Acronym
  (View Abstract)

Banks, James R.

• Seismic Design - Structural System: INTEGRAL BRIDGES – DEVELOPMENT OF A CONSTITUTIVE SOIL MODEL FOR SOIL STRUCTURE INTERACTION
  (View Abstract | View Presentation)

Bao, Yihai

• Application of Finite Element Analysis for Seismic Design and Evaluation of Concrete Buildings: Modeling of Damaged Shear Walls for Post-Event Collapse Analysis
  (View Abstract)

Baradaran Shoraka, Majid

• Validation and Verification of Hybrid Simulation for Seismic Structural Response: HYBRID SIMULATION OF THE GRAVITY LOAD COLLAPSE OF REINFORCED CONCRETE FRAMES
  (View Abstract)

Barker, Darrell D.

• Blast Resistant Buildings in Petrochemcial Facilities: Advanced Analysis Topics for Blast Resistant Buildings in Petrochemical Facilities
  (View Abstract)

Barker, Darrell

• Blast Resistant Buildings in Petrochemcial Facilities: Blast Response of Portable Buildings in Petrochemical Facilities
  (View Abstract)

Barr, Paul J.

• In-Service Monitoring of Bridges and High-Mast Light Towers: Utilization of Strong Motion Accelerometers for Real Time Monitoring of Structural Properties
  (View Abstract)

Barrett, J. David

• Poster Session I: Development of thick laminated wood plates using MPB wood
  (View Abstract)

Barrett-Gonzalez, Ron

• Fatigue Enhancement of Steel Structures: Fatigue Enhancement of Welded Coverplates Using Carbon-Fiber Composites
  (View Abstract)

Bartelt, Ted

• Bridge Case Studies: Structural Condition Assessment of the Herbert C. Bonner Bridge in Dare County, North Carolina
  (View Abstract | View Presentation)

Bartlett, F. Michael

• CSCE: The Confederation Bridge - The First 10 Years of Service: Wind Engineering for the Confederation Bridge
  (View Abstract)

Bartley, Tony C.

• Developments in Connection Design Specifications and Approaches: State-of-the-Art Analysis of Frames with Reduced Beam Section Connections
  (View Abstract)

Bartoletti, Stacy J.

• CASE Convocation Breakout Sessions: Ways to Make Your Life Easier and the World a Better Place: Scope, Contracts and Contract Document Tools
  (View Abstract)
• CASE Convocation Breakout Sessions: Ways to Make Your Life Easier and the World a Better Place: Scope, Contracts and Contract Document Tools
  (View Abstract)

Baylot, James T.

• Development and Validation of Advanced Modeling Methods for High-Rate Loadings: Dynamic Pull-out Test Simulations through the Lattice Discrete Particle Model (LDPM)
  (View Abstract | View Presentation)
• Impact Tests for Constitutive Models Analysis and Computation: Lattice Discrete Particle Model (LDPM) for Fracture Dynamics and Rate Effect in Concrete.
  (View Abstract | View Presentation)

Beck, James L.

• Structural Identification of Constructed Systems for Evaluation of Performance: System Identification on Actual Buildings: Challenges and Opportunities Across Hazards
  (View Abstract | View Presentation)

Becker, Duane D.

• New MBMA/AISC Methods for Design of Metal Building Frames: 3. Consideration of the Effects of Loading and Frame Configuration using the Direct Analysis Method
  (View Abstract | View Presentation)

Belis, Jan

• Poster Session II: Reinforced glass beams; Effect of increased temperatures on the glass-to-reinforcement adhesive bond
  (View Abstract)

Bell, Erin S.

• Train-Induced Vibrations in Buildings for Air-rights Developments: Long-Term Thermal Performance of a CFRP-Reinforced Bridge Deck
  (View Abstract | View Presentation)

Bennett, Caroline

• Fatigue Enhancement of Steel Structures: Fatigue Enhancement of Welded Coverplates Using Carbon-Fiber Composites
  (View Abstract)

Bentz, Audrey C.

• Damping in Buildings: Measurements, Uncertainty, and Application: Predictive Models for Damping in Buildings: The Role of Structural System Characteristics
  (View Abstract)

Bentz, Evan C.

• Recent Advances in Shear Design for Reinforced Concrete: One-Way Shear in Wide Concrete Beams with Narrow Supports
  (View Abstract)

Bergman, Don W.

• Cable Stayed Bridge Design: The Golden Ears Bridge in Vancouver, BC
  (View Abstract)

Berman, Jeffrey W.

• Poster Session III: Rotation and Strength Demands for Simple Connections to Develop Catenary Action
  (View Abstract)
• Bridge Design and Rehabilitation: Fatigue and Ultimate Capacity Comparison of Two Fiber Reinforced Polymer Bridge Decks
  (View Abstract)
• International Advances in Steel Plate Shear Walls 1: Research: Research Needs and Future Directions for Steel Plate Shear Walls
  (View Abstract)

Bhatti, Asghar

• Design of Structures for Wind Using Computational Methods: A Numerical Study of Wind Loads on Large Highway Sign Structures
  (View Abstract)

Bienkiewicz, Bogusz J.

• Lessons from Recent Windstorms: Lessons learned from structural damage investigations-a case study of 2003 Missouri-Kansas Tornadoes
  (View Abstract)

Billington, Sarah L.

• Application of Finite Element Analysis for Seismic Design and Evaluation of Concrete Buildings: Simulation of Self-Centering Fiber-Reinforced Concrete Columns
  (View Abstract)

Bilow, David N.

• Poster Session I: Fire and Concrete Structures
  (View Abstract)

Biondini, Fabio

• Structural Reliability in Design Practice: Use of Simulation in Structural Reliability
  (View Abstract)
• Structural Robustness and Redundancy: On Structural Robustness, Redundancy and Static Indeterminacy
  (View Abstract)

Bjorhovde, Reidar

• Development of AISI Cold-Formed Steel Seismic Design Standards: Overview of the Standard for Seismic Design of Cold-Formed Steel Structural Systems–Special Bolted Moment Frames
  (View Abstract)

Bland, Kenneth E.

• Sustainability for Structural Engineers: Material Industry Perspectives: Sustainability Attributes of Bio-Based Structural Building Products
  (View Abstract | View Presentation)

Bloodworth, Alan G.

• Seismic Design - Structural System: INTEGRAL BRIDGES – DEVELOPMENT OF A CONSTITUTIVE SOIL MODEL FOR SOIL STRUCTURE INTERACTION
  (View Abstract | View Presentation)

Bokan, Heinz

• Poster Session II: SOPHISTICATED NON-LINEAR 4D STRUCTURAL ANALYSIS FOR CABLE STAYED BRIDGES
  (View Abstract)

Bontempi, Franco

• Structural Robustness and Redundancy: NONLINEAR DYNAMIC ANALYSIS FOR THE STRUCTURAL ROBUSTNESS ASSESSMENT OF A COMPLEX STRUCTURAL SYSTEM
  (View Abstract | View Presentation)

Bonzon, Wade S.

• Cable Stayed Bridge Design: Unique Structural and Aesthetic Aspects of the Veterans' Glass City Skyway
  (View Abstract)

Booth, Peter N.

• Poster Session III: Behavior and Design of Steel-Plate Composite Walls
  (View Abstract | View Presentation)

Bos, Freek

• Poster Session II: Reinforced glass beams; Effect of increased temperatures on the glass-to-reinforcement adhesive bond
  (View Abstract)
• Assessment and Evaluation of Building Components: CABLE-STAYED FACADE STRUCTURE WITH WELDED BOROSILICATE GLASS TUBES
  (View Abstract)

Bounds, William L.

• Blast Resistant Buildings in Petrochemcial Facilities: General Update of the ASCE Report: Design of Blast Resistant Buildings in Petrochemical Facilities
  (View Abstract)

Bower, Owen J.

• High Rise Buildings - Session 2: Axial Restraint in Diagonally Reinforced Concrete Coupling Beams: An Analytical Investigation
  (View Abstract | View Presentation)

Bradshaw, Richard R.

• Structural Elegance: Structural Elegance
  (View Abstract)

Brakke, Bruce L.

• In-Service Monitoring of Bridges and High-Mast Light Towers: Field and Laboratory Studies on high-mast Lighting Towers in Iowa
  (View Abstract)

Braun, Kenton W.

• Poster Session I: Ice Forces on Inclined Bridge Piers
  (View Abstract | View Presentation)

Brett, Cory R.

• Train-Induced Vibrations in Buildings for Air-rights Developments: Predicting Train-Induced Vibrations in Multi-Story Buildings
  (View Abstract)

Brokaw, James T.

• Innovative Methods for Blast and Progressive Collapse Mitigation: Agent-Based Simulation of Human Movements During Emergency Evacuations of Facilities
  (View Abstract)

Brookes, Brianna

• In-Service Monitoring of Bridges and High-Mast Light Towers: Results of In-Service Monitoring of a Sample of Typical Highway Bridges
  (View Abstract | View Presentation)

Brooks, Robert T.

• Sustainability for Structural Engineers: Material Industry Perspectives: Sustainability Attributes of Bio-Based Structural Building Products
  (View Abstract | View Presentation)

Brosnan, Denis A.

• Building Façade: Water Penetration of Debris-Impacted Residential Wall Cladding Systems
  (View Abstract)

Brown, David L.

• Bridge Design and Rehabilitation: Fatigue and Ultimate Capacity Comparison of Two Fiber Reinforced Polymer Bridge Decks
  (View Abstract)

Brown, Steve

• IStructE: International Structural Engineering 2: Cutty Sark – the phoenix of the sea
  (View Abstract)

Brown, Thomas G.

• CSCE: The Confederation Bridge - The First 10 Years of Service: Confederation Bridge Ice Force Monitoring
  (View Abstract | View Presentation)

Brownjohn, James

• Structural Identification of Constructed Systems for Evaluation of Performance: A Review of Structural Identification for Bridge Structures
  (View Abstract)

Brownjohn, James M.

• Structural Identification of Constructed Systems for Evaluation of Performance: Structural Identification of Constructed Systems: Experimental Considerations
  (View Abstract)

Bruneau, Michel

• International Advances in Steel Plate Shear Walls 1: Research: Behavior and Design of Intermediate HBE in Steel Plate Shear Walls
  (View Abstract)
• International Advances in Steel Plate Shear Walls 1: Research: Research Needs and Future Directions for Steel Plate Shear Walls
  (View Abstract)

Buist, Larry

• Lessons from Recent Windstorms: Monitoring of Hurricane Wind Pressures and Wind Speeds on a Residential Home Roof With Wireless Instrumentation
  (View Abstract | View Presentation)

Bulleit, William M.

• Education of Structural Engineers - 1: Wood Education in Civil Engineering – The View from Lake Superior
  (View Abstract)
• The Next Step for ASCE 16: Performance-Based Design of Wood Structures: Performance-Based Design for Wood Residential Construction Subjected to Snow Loads
  (View Abstract | View Presentation)

Bundschuh, Gregg E.

• CASE Risk Management Spring Convocation Plenary Session 1: Building Information Modeling (BIM): The Promise and The Reality for A/E/C Firms
  (View Abstract)

Buonopane, Stephen G.

• Development and Validation of Advanced Modeling Methods for High-Rate Loadings: Effects of Random Properties on the Stability and System Reliability of Steel Frames
  (View Abstract)
• Sustainability for Structural Engineers: Strategies, Paradigms, and Measurement: The Basics of Life Cycle Assessment (LCA) for Structural Engineers
  (View Abstract)

Burgess, Christopher J.

• Cable Stayed Bridge Design: Innovative Features of Maine's First Cable Stay Bridge
  (View Abstract)

C

Callahan, Greg

• In-Service Monitoring of Bridges and High-Mast Light Towers: Field and Laboratory Studies on high-mast Lighting Towers in Iowa
  (View Abstract)

Callewaert, Dieter

• Poster Session II: Reinforced glass beams; Effect of increased temperatures on the glass-to-reinforcement adhesive bond
  (View Abstract)

Campbell, David M.

• Tensioned Fabric Structures - Case Studies: Snow Induced Ponding of Toyota Pavilion Canopy, Montage Mountain, PA
  (View Abstract)

Caple, Kacie D.

• Poster Session I: Preliminary Findings in the Development of Quantitative Tools for Assessing in situ Strength of Prestressed Concrete Structures Subjected to Fire
  (View Abstract | View Presentation)

Carrato, Peter J.

• Large Structures: Use of Chinese Steel for Heavy Industrial Projects
  (View Abstract | View Presentation)

Catbas, Necati

• Structural Identification of Constructed Systems for Evaluation of Performance: A Review of Structural Identification for Bridge Structures
  (View Abstract)
• Structural Identification of Constructed Systems for Evaluation of Performance: An Integrated Approach by the ASCE Committee
  (View Abstract)

Centeno, Jose

• CSCE: Seismic Performance and Retrofit of buildings - a Canadian Perspective: Seismic Performance Of Gravity Load Designed Reinforced Concrete Frames With Unreinforced Masonry Infill Walls
  (View Abstract | View Presentation)

Chadwell, Charles

• Seismic Design - Structural System: Evaluation of ASCE-41 Nonlinear Static Procedure Using Recorded Motions of Reinforced-Concrete Buildings
  (View Abstract)

Chadwell, Charles B.

• Seismic Evaluation - Walls: Experimental and Analytical Investigation of Seismic Performance of Sprayable Polyurethane Foam Infill Timber Shear Walls
  (View Abstract | View Presentation)

Chajes, Michael J.

• In-Service Monitoring of Bridges and High-Mast Light Towers: Results of In-Service Monitoring of a Sample of Typical Highway Bridges
  (View Abstract | View Presentation)

Chambers, Janice J.

• Developments in Connection Design Specifications and Approaches: State-of-the-Art Analysis of Frames with Reduced Beam Section Connections
  (View Abstract)

Chan, Jimmy H.

• Impact Tests for Constitutive Models Analysis and Computation: Single Degree of Freedom Characterization of Impact Load on Continuous Systems
  (View Abstract | View Presentation)

Chang, Chao-Shun

• Poster Session III: Research on the shrinkage deformation and crack development of high-strength high-performance concrete containing silica fume
  (View Abstract | View Presentation)

Charalambides, Jason E.

• Education of Structural Engineers - 2: Developing a computer assisted multi-disciplinary decision making platform
  (View Abstract | View Presentation)

Charlet, Arnaud Y.

• Validation and Verification of Hybrid Simulation for Seismic Structural Response: HYBRID SIMULATION OF THE GRAVITY LOAD COLLAPSE OF REINFORCED CONCRETE FRAMES
  (View Abstract)

Charney, Finley A.

• Are We Teaching the Wrong Stuff? : Structural Analysis: Are we teaching the Wrong Stuff?
  (View Abstract)
• The Use of Mathcad, Matlab, and other Applications and Technology in Teaching Advanced Structural Analysis: A Transformational Approaching to Teaching Matrix Structural Analysis
  (View Abstract)

Chassapis, Constantin

• Computational Aspects in Distance Education: IT-Enhanced Laboratory Experience within a Mechanical Engineering Undergraduate Curriculum
  (View Abstract | View Presentation)

Chen, Cheng

• NEES Projects: Real-time Hybrid Testing Using an Unconditionally Stable Explicit Integration Algorithm
  (View Abstract)

Chen, Chui Hsin

• New Developments in Concentrically Braced Frames for Seismic Design: Numerical modeling and performance assessment of concentrically braced steel frames
  (View Abstract)

Chen, David

• Tensioned Fabric Structures - Case Studies: Snow Induced Ponding of Toyota Pavilion Canopy, Montage Mountain, PA
  (View Abstract)

Chen, Helen

• Development of AISI Cold-Formed Steel Seismic Design Standards: Overview of the Standard for Seismic Design of Cold-Formed Steel Structural Systems–Special Bolted Moment Frames
  (View Abstract)

Chen, How Ji

• Poster Session III: A New Testing Method for Fatigue of Reinforced Concrete Beam
  (No Abstract | View Presentation)

Chen, How-Ji

• Poster Session III: The accelerated method for estimating corrosion of reinforced concrete structure in seawater
  (View Abstract | View Presentation)

Chen, Jiun-Shyan

• Development and Validation of Advanced Modeling Methods for High-Rate Loadings: Semi-Lagrangian Galerkin Reproducing Kernel Formulation and Stability Analysis for Computational Penetration Mechanics
  (View Abstract)

Chen, Sheng-Jin

• Seismic Evaluation - Walls: Seismic Behavior of Low Yield Point Steel Plate Shear Walls
  (View Abstract)

Chen, Yue

• Poster Session I: Development of thick laminated wood plates using MPB wood
  (View Abstract)

Cheng, An Shun

• Poster Session III: Relation between Porosity and Compressive Strength of Slag Concrete
  (View Abstract | View Presentation)

Cheng, Xiaohua H.

• Fatigue Enhancement of Steel Structures: Fatigue Resistance Enhancement and Residual Stress Modification of Welded Steel Structures by Various Post-Weld Treatments
  (View Abstract)

Chi, Hoseok

• NEES Projects: DESIGN AND ANALYTICAL VALIDATION OF POST-TENSIONED COLUMN BASES
  (View Abstract)

Chiarito, Vincent P.

• Remote Sensing for Condition Assessment and Damage Identification: Assessing Damage of a Reinforced Concrete Structural Element using System Identification
  (View Abstract)

Chidambaram, Sankaralingam

• Cable Stayed Bridge Design: Wadi Abdoun Bridge - Jordan
  (View Abstract)

Christiansen, Axel

• IABSE: Recent Developments in International Bridge and Structural Engineering Part 3: The Great Danish Bridge Connections: State Of The Art Of Bridge Engineering In Denmark
  (View Abstract)

Christovasilis, Ioannis P.

• ATC-63 - Quantification of Building System Performance and Response Parameters: Example Evaluation of the ATC-63 Methodology for Wood Light-Frame System
  (View Abstract)

Christovasilis,, Ioannis P.

• Post Earthquake Investigation of Wood Buildings: Experimental Seismic Investigation of a Full-Scale Woodframe Building
  (View Abstract)

Chudgar, Samir

• Existing Buildings - Codes / Standards / Evaluation and Rehabilitation: Pioneer Square Areaways
  (View Abstract | View Presentation)

Cimellaro, Gian Paolo

• Poster Session I: ALGORITHM FOR OPTIMAL DESIGN OF ADJACENT BUILDINGS CONNECTED BY FLUID VISCOUS DEVICES
  (View Abstract | View Presentation)

Citipitioglu, Ahmet

• Advances in Seismic Isolation Design Practice in the U.S. and Japan: An Innovative Application of Base Isolation Technology
  (View Abstract)

Clark, Kelly

• New Developments in Concentrically Braced Frames for Seismic Design: Test of a full scale concentrically braced frame with multi-story X-bracing
  (View Abstract)

Cleland, Ned

• Developments in Connection Design Specifications and Approaches: Steel Connection Design for Structural Integrity
  (View Abstract)

Clouston, Peggi

• Education of Structural Engineers - 1: Pedagogic Strategies for Wood Engineering in an Interdisciplinary Setting
  (View Abstract)

Cocca, John E.

• Extreme Loads: Mathmatical Simulation of 50- Year Snow Drift Loads
  (View Abstract)

Cochran, Leighton

• Introduction to the new ASCE Technical Council on Wind Engineering: Background to the Structural Wind Engineering Committee
  (View Abstract | View Presentation)
• Introduction to the new ASCE Technical Council on Wind Engineering: Creation of the ASCE TCWE
  (View Abstract)

Coco, Russell J.

• Wind or Water? (Separating Wind and Storm-Surge Damage in Hurricanes): Effective Forensic Engineering Investigations of Hurricane
  (View Abstract)

Collings, David

• CASE Risk Management Spring Convocation Plenary Session 1: Building Information Modeling (BIM): The Promise and The Reality for A/E/C Firms
  (View Abstract)

Collins, Michael P.

• Recent Advances in Shear Design for Reinforced Concrete: One-Way Shear in Wide Concrete Beams with Narrow Supports
  (View Abstract)

Connor, Robert J.

• In-Service Monitoring of Bridges and High-Mast Light Towers: Field and Laboratory Studies on high-mast Lighting Towers in Iowa
  (View Abstract)

Consolazio, Gary R.

• The Use of Mathcad, Matlab, and other Applications and Technology in Teaching Advanced Structural Analysis: Leveraging the integrated programming and visualization features of Mathcad in teaching advanced structural analysis
  (View Abstract)

Constantinescu, George

• Design of Structures for Wind Using Computational Methods: A Numerical Study of Wind Loads on Large Highway Sign Structures
  (View Abstract)

Conte, Joel P.

• Structural Identification of Constructed Systems for Evaluation of Performance: A Review of Structural Identification for Bridge Structures
  (View Abstract)

Cortes, Gustavo

• Poster Session II: ANALYTICAL INVESTIGATION OF STEEL SLIT PANELS FOR LATERAL RESISTANCE OF STEEL FRAME BUILDINGS
  (View Abstract | View Presentation)

Coulbourne, William L.

• Wind Engineering: Wind Speed Analysis of Greensburg, KS Tornado
  (View Abstract | View Presentation)

Coult, Graham

• Glass Structures: An All Glass Cube in New York City
  (View Abstract)

Cramer, Steven M.

• Education of Structural Engineers - 1: The Changing Nature of Students and Universities: Opportunities
  (View Abstract)

Crawford, John

• Innovative Methods for Blast and Progressive Collapse Mitigation: RETROFIT OF MASONRY WALLS TO ENHANCE THEIR BLAST RESISTANCE
  (View Abstract)

Crépeau, Louis

• International Advances in Steel Plate Shear Walls 2: Design Codes and Applications: SPSW Application for the Rehabilitation of Seismically Deficient Reinforced Concrete Building
  (View Abstract | View Presentation)

Cross, Brad

• In-Service Monitoring of Bridges and High-Mast Light Towers: Experienced gained and lessons learned from an extensive bridge monitoring research project
  (View Abstract)

Crowder, Brian R.

• Progressive Collapse: Unified Progressive Collapse Design Requirements for DOD and GSA
  (View Abstract)

Cusatis, Gianluca

• Development and Validation of Advanced Modeling Methods for High-Rate Loadings: Dynamic Pull-out Test Simulations through the Lattice Discrete Particle Model (LDPM)
  (View Abstract | View Presentation)
• Impact Tests for Constitutive Models Analysis and Computation: Lattice Discrete Particle Model (LDPM) for Fracture Dynamics and Rate Effect in Concrete.
  (View Abstract | View Presentation)

Cussen, R.

• Global Building System Behavior Under Abnormal Loading Events: Inelastic Dynamic Finite Element Design of Glazed Facade Systems for Blast Loading
  (View Abstract | View Presentation)

D

Dalrymple, Gerald A.

• Masonry Design and Evaluation: Forensic Evaluation Techniques for Masonry Construction
  (View Abstract | View Presentation)

Danielson, Kent

• Development and Validation of Advanced Modeling Methods for High-Rate Loadings: Semi-Lagrangian Galerkin Reproducing Kernel Formulation and Stability Analysis for Computational Penetration Mechanics
  (View Abstract)

Dao, Thang N.

• The Next Step for ASCE 16: Performance-Based Design of Wood Structures: Performance-Based Design of Wood Frame Structures for Wind
  (View Abstract)

Dastfan, Mehdi

• International Advances in Steel Plate Shear Walls 1: Research: Behavior of Steel Plate Shear Walls with Composite Columns
  (View Abstract)

Datteri, Ryan

• Computational Aspects in Distance Education: Optimizing Resources in Undergraduate Research
  (View Abstract)

Davaran, Ali

• Poster Session I: An Inelastic Model for Low Cycle Fatigue Prediction in Steel Braces
  (View Abstract | View Presentation)
• Poster Session I: Analytical investigation of mixed BRBF and SCBF braced steel frames
  (View Abstract | View Presentation)
• Poster Session I: Effect of Mid-Connection Detail of Cross Bracings on Elastic-Plastic Behavior of Braced System
  (View Abstract | View Presentation)

Davidson, Rachel A.

• Network Infrastructure Performance for Extreme Winds: Estimating Electric Power Outages due to Hurricane and Ice Storms Using Spatial Generalized Linear Mixed Models
  (View Abstract)

Dawson, H.

• Global Building System Behavior Under Abnormal Loading Events: Inelastic Dynamic Finite Element Design of Bollard Systems to Impact Loading
  (View Abstract)

De Palma, Paul

• Computational Aspects in Distance Education: Optimizing Resources in Undergraduate Research
  (View Abstract)

Degracia, Steve

• Computational Aspects in Distance Education: Integration of New Teaching Methodologies into a Laboratory Based Course
  (View Abstract | View Presentation)

Deierlein, Gregory G.

• ATC-63 - Quantification of Building System Performance and Response Parameters: ATC 63 Methodology for Evaluating Seismic Collapse Safety of Archetype Buildings
  (View Abstract)
• Collapse Simulation of Structural Systems Subjected to Seismic Excitation in Engineering Practice: Comparing Seismic Collapse Safety of Modern and Existing Reinforced Concrete Frame Structures in California
  (View Abstract)
• ATC-63 - Quantification of Building System Performance and Response Parameters: Example Evaluation of the ATC-63 Methodology for Reinforced Concrete Special Moment Frame Buildings
  (View Abstract)
• Collapse Simulation of Structural Systems Subjected to Seismic Excitation in Engineering Practice: Study of Building Collapse for Performance-Based Design Validation
  (View Abstract)

Delisle, Rodney

• Utilization of Non Destructive Testing (NDT) Methods in Structural Health Monitoring (SHM): Deterioration Rates for Bridge Components in New York
  (View Abstract)

Deng, Xiaoyan

• International Advances in Steel Plate Shear Walls 1: Research: Behavior of Steel Plate Shear Walls with Composite Columns
  (View Abstract)

Denzer, Anthony S.

• Education of Structural Engineers - 2: How a Collaborative Architecture Influences Structural Engineering Education
  (View Abstract | View Presentation)

DeRoeck, Guido

• Structural Identification of Constructed Systems for Evaluation of Performance: A Review of Structural Identification for Bridge Structures
  (View Abstract)

DesRoches, Reginald

• Seismic Design of Bridges: Which ground motion intensity measure is most appropriate for conditioning demand models for bridge portfolios?
  (View Abstract)
• Performance-based Evaluation of Passive Control Systems: Seismic Performance Assessment of a Passive Control Technology for Bridges using Shape Memory Alloys
  (View Abstract)
• Advances in Structural Control: Analytical Study of SDOF Systems with Superelastic Shape Memory Alloy Properties
  (View Abstract | View Presentation)
• Bridge Design and Rehabilitation: Comparative Assessment with Detailed Models of Sliding versus Elastomeric Seismic Isolation in Typical Multi-Span Bridges
  (View Abstract)

Diamantidis, Dimitris

• Structural Reliability in Design Practice: Current safety acceptance criteria in codes and standards - a critical review
  (View Abstract | View Presentation)

Dickie, Jocelyn E.

• Connections and Detailing - 1: Horizontal Joint Reinforcement Requirements for Brick Veneer in Seismic Design Categories E and F
  (View Abstract)
• Building Façade: Height Restrictions for Brick Veneer with Wood Frame Backing
  (View Abstract)

Dickson, Michael G.

• IStructE: International Structural Engineering I: Timber engineered for C21 Architecture
  (View Abstract)

Dilger, W. H.

• CSCE: The Confederation Bridge - The First 10 Years of Service: Thermal Response of the Confederation Bridge: Extreme Thermal Loading and Expansion Joint Movement
  (View Abstract)

DiMaggio, Peter

• Innovative Methods for Blast and Progressive Collapse Mitigation: Blast Resistant Design using Advanced, State-of-the Art Materials
  (View Abstract | View Presentation)

Ding, Jiemin

• Poster Session III: Analysis and Design of the Roof Structure of Table Tennis Gymnasium for the 2008 Olympic Games
  (View Abstract)

Diniz, Sofia M.

• Structural Reliability in Design Practice: Structural Reliability: Rational Tools for Design Code Development
  (View Abstract)

Dodge, Darius P.

• Seismic Evaluation - Walls: Experimental and Analytical Investigation of Seismic Performance of Sprayable Polyurethane Foam Infill Timber Shear Walls
  (View Abstract | View Presentation)

Doepker, Blake

• Application of Finite Element Analysis for Seismic Design and Evaluation of Concrete Buildings: Evaluation of Practical Methods for Analysis of Reinforced Concrete Walls
  (View Abstract)

Doerrer, Ryan

• Poster Session II: LIVE LOAD DISTRIBUTION FOR CAST IN PLACE BOX GIRDER BRIDGES
  (View Abstract)

Doh, Jeung-Hwan

• Poster Session II: Behavior Characteristic of Hypar Shaped Space Truss with Removed Members
  (View Abstract)

Domaingo, Andreas

• Cable Stayed Bridge Design: SOFTWARE TOOL FOR WIND DESIGN OF CABLE STAYED BRIDGES
  (View Abstract)

Dong, Yuli

• Fire Behavior and Design of Steel and Composite Structures: Experimental Study on the Behavior of Composite Steel Frame Subjected to Fire
  (View Abstract)

Driver, Robert G.

• International Advances in Steel Plate Shear Walls 2: Design Codes and Applications: Steel Plate Shear Walls in the Upcoming 2010 AISC Seismic Provisions and 2009 Canadian Standard S16
  (View Abstract)
• International Advances in Steel Plate Shear Walls 1: Research: Behavior of Steel Plate Shear Walls with Composite Columns
  (View Abstract)
• International Advances in Steel Plate Shear Walls 1: Research: Research Needs and Future Directions for Steel Plate Shear Walls
  (View Abstract)

DuBois, Mark

• Glass Structures: Glass Bearing Walls
  (View Abstract)

Dunkman, David A.

• Building Façade: Dormant Curtain Wall Anchors: Relative Stiffness & Underdesign
  (View Abstract | View Presentation)

Dusicka, Peter

• New Developments in Concentrically Braced Frames for Seismic Design: Concept of Buckling Restraint of Steel Braces with Fiber Reinforced Polymers
  (View Abstract)

Dutta, Anindya

• Advances in Seismic Isolation Design Practice in the U.S. and Japan: An Innovative Application of Base Isolation Technology
  (View Abstract)

Dwaikat, Monther

• Design for Structural Fire Safety: Fire Performance of Reinforced Concrete Beams under Design Fire Exposures
  (View Abstract)

Dyke, Shirley J.

• General Seismic - Analysis: A Total Strain Based Hysteretic Material Model for 2D Planar Reinforced Concrete Structures
  (View Abstract | View Presentation)
• Poster Session III: A Structural Damage Detection Method Based On Subset Selection and Evolutionary Computation
  (View Abstract | View Presentation)

E

Eagan, Patrick L.

• 2006 SJI Standard Specification for the Design of Composite Steel Joists, Cj-Series - A New Specification and Catalog for the Design Professional: 2006 SJI Standard Specification for the Design of Composite Steel Joists, CJ-Series -- A New Specification and Catalog for the Design Professional
  (View Abstract)

Easazadeh Far, Narges

• Poster Session I: An Inelastic Model for Low Cycle Fatigue Prediction in Steel Braces
  (View Abstract | View Presentation)

Ebrahimi, Ali

• Poster Session I: The Effect of Soil-Structure Interaction in 14-story Building Retrofitting Project of National Housing and Land Organization
  (View Abstract)

Eitel Biegalski, Amy

• In-Service Monitoring of Bridges and High-Mast Light Towers: Problem Diagnosis and Retrofit of A Steel Truss Bridge
  (View Abstract)

El Damatty, Ashraf

• Network Infrastructure Performance for Extreme Winds: Modeling and prediction of failure of transmission lines due to high intensity winds
  (View Abstract)

El-Badry, Mamdouh

• CSCE: Seismic Performance and Retrofit of buildings - a Canadian Perspective: Steel Reinforced Polymers Enhance Strength and Ductility of Beam-Column Joints under Seismic Loads
  (View Abstract)
• CSCE: The Confederation Bridge - The First 10 Years of Service: Long-Term Deformations and Stresses
  (View Abstract)

El-Chabib, Hassan H.

• Connections and Detailing - 1: Shear Capacity of FRP Stirrups in FRP-Reinforced Concrete Beams Based on Genetic Algorithms Approach
  (View Abstract)

El-Reedy, Mohamed A.

• Industrial Facilities - Silos Tanks & Dams: Reliability Analysis of LPG Sphere tanks Legs
  (View Abstract)

El-Tawil, Sherif

• Progressive Collapse: Assessment of Progressive Collapse Residual Capacity using Pushdown Analysis
  (View Abstract)

Elbadry, Mamdouh

• CSCE: Seismic Performance and Retrofit of buildings - a Canadian Perspective: Experimental Investigation of the Cyclic Behavior of Concrete Frame Joints Reinforced with Double-Headed Studs
  (View Abstract)

Elliott, Douglas N.

• CASE Convocation Breakout Sessions: Closed Claims – “Lessons Learned”
  (View Abstract)

ELSAFTY, ADEL

• Bridge Design and Rehabilitation: Extending the Service Life of Bridges Using CFRP Laminates and Continuous Decks
  (View Abstract | View Presentation)
• Forensic Structural Engineering: Forensic Investigation of a Bridge Construction Scaffolding Collapse
  (View Abstract | View Presentation)

Elwood, Kenneth J.

• Validation and Verification of Hybrid Simulation for Seismic Structural Response: HYBRID SIMULATION OF THE GRAVITY LOAD COLLAPSE OF REINFORCED CONCRETE FRAMES
  (View Abstract)

Erbay, Omer O.

• Poster Session I: Crack Propagation Evaluation of Polymer Composite FRP Panels Subjected to Static and Cyclic Loading
  (View Abstract)

Erdogan, Ersoz

• Poster Session III: ELASTOPLASTIC ANALYSIS AND DUCTILITY EVALUATION OF STEEL TUBULAR COLUMNS SUBJECTED TO CYCLIC LOADING
  (View Abstract | View Presentation)

Ericson, Nils V. (Val)

• CASE Convocation Breakout Sessions: Closed Claims – “Lessons Learned”
  (View Abstract)

Eröz, Murat

• Bridge Design and Rehabilitation: Comparative Assessment with Detailed Models of Sliding versus Elastomeric Seismic Isolation in Typical Multi-Span Bridges
  (View Abstract)

Esche, Sven

• Computational Aspects in Distance Education: IT-Enhanced Laboratory Experience within a Mechanical Engineering Undergraduate Curriculum
  (View Abstract | View Presentation)

Eschenasy, Dan

• Innovative Structural Systems: Design and Construction for Dense Urban Areas –Structural Engineering Challenges?
  (View Abstract)

Ettouney, Mohammed

• Utilization of Non Destructive Testing (NDT) Methods in Structural Health Monitoring (SHM): Suitability of Non Destructive Testing (NDT) Methods for Structural Health Monitoring (SHM) of Civil Infrastructures
  (View Abstract)
• Remote Sensing for Condition Assessment and Damage Identification: Review of Remote Sensing for Condition Assessment and Damage Identification after Extreme Loading Conditions
  (View Abstract)

F

Fahnestock, Larry A.

• General Seismic - Analysis: Ductility Capacity Models for Buckling-Restrained Braces using a Bayesian Methodology
  (View Abstract | View Presentation)

Falken, Luke

• Poster Session III: ELASTOPLASTIC ANALYSIS AND DUCTILITY EVALUATION OF STEEL TUBULAR COLUMNS SUBJECTED TO CYCLIC LOADING
  (View Abstract | View Presentation)

Farooqi, Najibullah

• Remote Sensing for Condition Assessment and Damage Identification: Remote Monitoring on Internal Condition of Buried Pipe Infrastructures
  (View Abstract)

Farrar, Charles

• Structural Identification of Constructed Systems for Evaluation of Performance: A Review of Structural Identification for Bridge Structures
  (View Abstract)

FEGHALY, Roy

• Forensic Structural Engineering: Analyses of the reasons of Roissy Terminal 2E collapse in France using deterministic and reliability assessments
  (View Abstract | View Presentation)

Feldgun, Vladimir R.

• Development and Validation of Advanced Modeling Methods for High-Rate Loadings: Study of Soil-Structure Interaction Response to Nearby Explosions by Coupled 2D Godunov – Variational Difference Approach
  (View Abstract | View Presentation)

Fennell, Jason P.

• Lessons from Recent Windstorms: A Rational Benefit/Cost Approach for Evaluating Structural Mitigation for Wind Damage: Learning
  (View Abstract)

Fenves, Gregory L.

• Advances in Software Development for Structural Engineering Applications: Nonlinear Structural Analysis Using Software Design Patterns
  (View Abstract)

Fernández, Alberto

• Large Structures: An enclosure for the European Extremely Large Telescope
  (View Abstract | View Presentation)

Filiatrault, Andre

• ATC-63 - Quantification of Building System Performance and Response Parameters: Example Evaluation of the ATC-63 Methodology for Wood Light-Frame System
  (View Abstract)
• Post Earthquake Investigation of Wood Buildings: Experimental Seismic Investigation of a Full-Scale Woodframe Building
  (View Abstract)

Finlayson, Bruce A.

• A&C Plenary Session: Simulations Involving Multiple Physics using Comsol Multiphysics
  (View Abstract | View Presentation)

Finn, William D.

• CSCE: Seismic Performance and Retrofit of buildings - a Canadian Perspective: Performance-based Retrofit Guidelines for School Buildings in British Columbia, Canada
  (View Abstract | View Presentation)

Firth, Ian

• IABSE: Recent Developments in International Bridge and Structural Engineering Part 1: The Good, The Bad And The Ugly - Lessons From Bridge Design Competitions
  (View Abstract)

Fisher, John W.

• Fatigue Enhancement of Steel Structures: Assessment of the Fatigue Threshold of Welded Details subjected to Post-Weld Ultrasonic Impact Treatment
  (View Abstract)
• Fatigue Enhancement of Steel Structures: Fatigue Resistance Enhancement and Residual Stress Modification of Welded Steel Structures by Various Post-Weld Treatments
  (View Abstract)

Fitzgerald, Sean

• Computational Aspects in Distance Education: Optimizing Resources in Undergraduate Research
  (View Abstract)

Foley, Christopher M.

• System Performance Optimization - Minimizing Annual Loss, Minimizing Life-Cycle Costs and Maximizing Performance Reliability: Automated Risk-Based Design Method for Optimal Structural and Non-Structural System Performance
  (View Abstract | View Presentation)

Foo, Simon

• CSCE: Seismic Performance and Retrofit of buildings - a Canadian Perspective: Seismic Performance Of Gravity Load Designed Reinforced Concrete Frames With Unreinforced Masonry Infill Walls
  (View Abstract | View Presentation)

Fortney, Patrick

• High Rise Buildings - Session 1: DESIGN COMPRESSION FORCES FOR COUPLED WALL STRUCTURES
  (View Abstract)

Fortney, Patrick J.

• Poster Session I: Preliminary Findings in the Development of Quantitative Tools for Assessing in situ Strength of Prestressed Concrete Structures Subjected to Fire
  (View Abstract | View Presentation)

Frangopol, Dan M.

• Structural Robustness and Redundancy: On Structural Robustness, Redundancy and Static Indeterminacy
  (View Abstract)
• System Performance Optimization - Minimizing Annual Loss, Minimizing Life-Cycle Costs and Maximizing Performance Reliability: Structural Performance Optimization with Conflicting Objectives under Uncertainty
  (View Abstract)

Freeman, Sigmund A.

• Existing Buildings - Codes / Standards / Evaluation and Rehabilitation: ASCE-31 and ASCE-41: What Good Are They?
  (View Abstract)

Friedland, Carol J.

• Remote Sensing for Condition Assessment and Damage Identification: Remote Sensing and Field Reconnaissance for Rapid Damage Detection in Hurricane Katrina
  (View Abstract)

Fritz, William P.

• Damping in Buildings: Measurements, Uncertainty, and Application: Models for the median and variability of building damping based on basic building properties
  (View Abstract)

Fu, Paul

• Poster Session III: Design of an architectural roof lantern at top of plaza 66 tower 2
  (View Abstract)

Fujino, Y

• Structural Identification of Constructed Systems for Evaluation of Performance: Structural Identification of Constructed Systems: Experimental Considerations
  (View Abstract)

G

Galsworthy, Jon

• Network Infrastructure Performance for Extreme Winds: Modeling and prediction of failure of transmission lines due to high intensity winds
  (View Abstract)

Ganzerli, Luigi

• Poster Session I: Preservation of Historical Walser Houses in Alagna Valsesia, Italy
  (View Abstract)

Ganzerli, Sara

• Computational Aspects in Distance Education: Integration of New Teaching Methodologies into a Laboratory Based Course
  (View Abstract | View Presentation)
• Computational Aspects in Distance Education: Optimizing Resources in Undergraduate Research
  (View Abstract)
• Poster Session I: Preservation of Historical Walser Houses in Alagna Valsesia, Italy
  (View Abstract)

Garay, Juan de Dios

• Advances in Material Properties and Design: Behavior of Concrete Deep Beams with High Strength Reinforcement
  (View Abstract)

Garber, Jason

• High Rise Buildings - Session 2: Wind Tunnel Techniques for Towers of Unusual Geometry
  (View Abstract)

Gardoni, Paolo

• General Seismic - Analysis: SEISMIC FRAGILITY ANALYSIS OF TYPICAL LOW- TO MID-RISE REINFORCED CONCRETE STRUCTURES
  (View Abstract | View Presentation)

Garlock, Maria

• NEES Projects: DESIGN AND ANALYTICAL VALIDATION OF POST-TENSIONED COLUMN BASES
  (View Abstract)

Gasulla, Ernesto M.

• Blast Resistant Buildings in Petrochemcial Facilities: Blast Hardened Retrofit Details for Petrochemical Buildings
  (View Abstract | View Presentation)

Gebhart, Kenneth

• Progressive Collapse: Progressive Collapse Analysis of a Steel Building with Pre-Northridge Moment Connections
  (View Abstract | View Presentation)

Ghaboussi, Jamshid

• NEES Projects: Predictor-Corrector Algorithm for Multi-site Hybrid Simulation
  (View Abstract | View Presentation)

Ghali, A.

• CSCE: The Confederation Bridge - The First 10 Years of Service: Long-Term Deformations and Stresses
  (View Abstract)

GHOLHAKI, Majid

• Steel Shear Wall Systems-Recent Experimental and Analytical Studies: Tests of Two Three-Story Ductile Steel Plate Shear Walls
  (View Abstract)

Ghosh, Shubharoop

• Remote Sensing for Condition Assessment and Damage Identification: Remote Sensing and Field Reconnaissance for Rapid Damage Detection in Hurricane Katrina
  (View Abstract)

Gibb, William

• Connections and Detailing - 2: Inelastic Cyclic Testing of the Kaiser Bolted Bracket Moment Connection
  (View Abstract)

Giezen, Cecile

• Assessment and Evaluation of Building Components: CABLE-STAYED FACADE STRUCTURE WITH WELDED BOROSILICATE GLASS TUBES
  (View Abstract)

Gilani, Amir S.

• Prequalified Moment Connections for Seismic Design of Steel Structures: Design of a new steel moment frame building using ASCE 7 provisions
  (View Abstract | View Presentation)
• Seismic Evaluation - Walls: Earthquake Simulator Testing and Evaluation of Suspended Ceilings: Standard and Alternate Perimeter Installations
  (View Abstract | View Presentation)

Gilbert, Robert B.

• What Makes a Wood Design a Good Design?: A Proposed Design Method for Wood Piles used in Residential Construction
  (View Abstract)

Gindy, Mayrai

• Structural Reliability in Design Practice: Development of a Bridge Live Load Model for Serviceability Limit States
  (View Abstract | View Presentation)

Giuliani, Luisa B.

• Poster Session II: NONLINEAR ANALYSIS FOR PROGRESSIVE COLLAPSE INVESTIGATIONS ON R.C. FRAMED STRUCTURES
  (View Abstract | View Presentation)

Giuliani, Luisa

• Structural Robustness and Redundancy: NONLINEAR DYNAMIC ANALYSIS FOR THE STRUCTURAL ROBUSTNESS ASSESSMENT OF A COMPLEX STRUCTURAL SYSTEM
  (View Abstract | View Presentation)

Gizejowski, Marian A.

• Seismic Design - Structural System: Practical Equivalent Stiffness Approach for Direct Design of Steel Frames
  (View Abstract)

Glasgow, Bob

• Seismic Evaluation - Walls: Earthquake Simulator Testing and Evaluation of Suspended Ceilings: Standard and Alternate Perimeter Installations
  (View Abstract | View Presentation)

Godinho, Jessica

• Extreme Loads: Air-blast failure criteria for columns using finite element methods
  (View Abstract)

Goel, Rakesh

• Seismic Design - Structural System: Evaluation of ASCE-41 Nonlinear Static Procedure Using Recorded Motions of Reinforced-Concrete Buildings
  (View Abstract)
• Risk, Reliability, and Safety in the Offshore Environment: Simplified Procedure for Seismic Analysis of Reinforced-Concrete Piles in Marine Oil Terminals
  (View Abstract)

Goodson, Mary W.

• Sustainability for Structural Engineers: Strategies, Paradigms, and Measurement: Concrete Construction with a View Towards Sustainability
  (View Abstract)

Gossen, Paul A.

• Tensioned Fabric Structures - Case Studies: Snow Induced Ponding of Toyota Pavilion Canopy, Montage Mountain, PA
  (View Abstract)

Gould, Nathan C.

• Progressive Collapse: PROGRESSIVE COLLAPSE ANALYSIS AND RETROFIT DESIGN USING THE UNIFIED FACILITIES CRITERIA
  (View Abstract)
• Education of Structural Engineers - 2: PREPARING GRADUATES TO BE EFFECTIVE CONTRIBUTORS IN A STRUCTURAL ENGINEERING OFFICE
  (View Abstract)

Gould, Phillip L.

• Education of Structural Engineers - 2: PREPARING GRADUATES TO BE EFFECTIVE CONTRIBUTORS IN A STRUCTURAL ENGINEERING OFFICE
  (View Abstract)

Green, Perry S.

• 2006 SJI Standard Specification for the Design of Composite Steel Joists, Cj-Series - A New Specification and Catalog for the Design Professional: An Introduction to Composite Steel Joists – Research and Behavior
  (View Abstract | View Presentation)
• 2006 SJI Standard Specification for the Design of Composite Steel Joists, Cj-Series - A New Specification and Catalog for the Design Professional: SJI First Edition CJ-Series Standard Specifications for Composite Steel Joists, Weight Tables, Bridging Tables and Code of Standard Practice
  (View Abstract | View Presentation)
• Practical Solutions for Stability and Bracing of Steel Frames: Erection Bridging of Open-Web Steel Joists and Joist Girders
  (View Abstract | View Presentation)

Green, Travis P.

• Bridge Case Studies: Structural Condition Assessment of the Herbert C. Bonner Bridge in Dare County, North Carolina
  (View Abstract | View Presentation)

Griezic, Andrew

• Cable Stayed Bridge Design: The Canada Line Extradosed Transit Bridge
  (View Abstract)

Griffith, Morgan

• Wind Engineering: Wind-Driven Rain as a Design Parameter
  (View Abstract)
• Post Earthquake Investigation of Wood Buildings: Woodframe Seismic Response Analysis – Benchmarking with Buildings Damaged During the Northridge Earthquake
  (View Abstract)

Grimmelsman, Kirk A.

• Structural Identification of Constructed Systems for Evaluation of Performance: A Review of Structural Identification for Bridge Structures
  (View Abstract)

Groenier, James "Scott" S.

• Timber Bridge Design Issues: Designing Timber Bridge Superstructures: A Comparison of US and Canadian Codes
  (View Abstract)

Gromala, David S.

• Sustainability for Structural Engineers: Material Industry Perspectives: Sustainability Attributes of Bio-Based Structural Building Products
  (View Abstract | View Presentation)

Grossenbacher, Steve V.

• Sustainability for Structural Engineers: Strategies, Paradigms, and Measurement: Structural Testing of High Thermal Mass Walls Used in Sustainable Designs
  (View Abstract)

Guikema, Seth D.

• Network Infrastructure Performance for Extreme Winds: Estimating Power Outages During Hurricanes Using Semi-Parametric Statistical Methods
  (View Abstract)

Gupta, Akshay

• Large Structures: PERFORMANCE-BASED SEISMIC DESIGN OF AN INDUSTRIAL STORAGE RACK SYSTEM
  (View Abstract)
• Post Earthquake Investigation of Wood Buildings: Woodframe Seismic Response Analysis – Benchmarking with Buildings Damaged During the Northridge Earthquake
  (View Abstract)

Gupta, Rakesh

• The Next Step for ASCE 16: Performance-Based Design of Wood Structures: Performance Based Design of Wood Structures – Designing for Durability
  (View Abstract)

Gurav, Sanjay

• Poster Session II: Road Surface Roughness Generation by Power Spectral Density in Bridge Design
  (View Abstract)

Gurbuz, Orhan

• Application of Finite Element Analysis for Design of Concrete Structures: Dynamic Nonlinear Finite element analysis of Blast Resistant concrete buildings in Petrochemical Facilities
  (View Abstract | View Presentation)

Gurley, Kurt

• Lessons from Recent Windstorms: Impact of the 2004 Hurricane Season on the Florida Public Hurricane Loss Model
  (View Abstract | View Presentation)

Gustafson, Kurt

• Developments in Connection Design Specifications and Approaches: Steel Connection Design for Structural Integrity
  (View Abstract)

H

Haberland, Marco

• Structural Robustness and Redundancy: Measures of Structural Robustness -- Requirements and Applications
  (View Abstract | View Presentation)

Hagh, Abdol

• Bridge Case Studies: Demolition of the Grace Memorial and Silas N. Pearman Bridges over Cooper River, South Carolina, USA – A Case Study
  (View Abstract)

Hall, Bruce

• Progressive Collapse: Unified Progressive Collapse Design Requirements for DOD and GSA
  (View Abstract)

Halling, Marvin W.

• In-Service Monitoring of Bridges and High-Mast Light Towers: Utilization of Strong Motion Accelerometers for Real Time Monitoring of Structural Properties
  (View Abstract)
• Structural Identification of Constructed Systems for Evaluation of Performance: A Review of Structural Identification for Bridge Structures
  (View Abstract)

Hamburder, Ronald O.

• Prequalified Moment Connections for Seismic Design of Steel Structures: The Latest Prequalification Standard for Special and Intermediate Steel Moment Frame Connections
  (View Abstract)

Hamburger, Ronald O.

• Prequalified Moment Connections for Seismic Design of Steel Structures: A Historical Overview of Prequalified Moment Connections
  (View Abstract)
• Advances in Seismic Isolation Design Practice in the U.S. and Japan: An Innovative Application of Base Isolation Technology
  (View Abstract)
• Developments in Connection Design Specifications and Approaches: Steel Connection Design for Structural Integrity
  (View Abstract)

Hamid, Shahid

• Lessons from Recent Windstorms: Impact of the 2004 Hurricane Season on the Florida Public Hurricane Loss Model
  (View Abstract | View Presentation)

Hamme, Markus

• Bridge Design and Rehabilitation: Strengthening of Orthotropic Steel Bridge Decks by SPS Technology
  (View Abstract)

Hamoush, Sameer

• Masonry Veneer Research Evaluation and Design: Seismic Masonry Veneer: Quasi- Static Testing of Wood Stud Backed Clay Masonry Veneer Walls
  (View Abstract | View Presentation)

Han, Seung-Ryong

• Network Infrastructure Performance for Extreme Winds: Estimating Power Outages During Hurricanes Using Semi-Parametric Statistical Methods
  (View Abstract)

Hangan, Horia

• Network Infrastructure Performance for Extreme Winds: Modeling and prediction of failure of transmission lines due to high intensity winds
  (View Abstract)

Hangan, Horia M.

• Design of Structures for Wind Using Computational Methods: Modeling of High Intensity Winds
  (View Abstract)

Hansen, Zachary

• In-Service Monitoring of Bridges and High-Mast Light Towers: Utilization of Strong Motion Accelerometers for Real Time Monitoring of Structural Properties
  (View Abstract)

Hanskat, Charles S.

• Liquid-Containing Structures: Why Does My New Concrete Tank Leak?
  (View Abstract | View Presentation)

Harmon, Thomas

• General Seismic - Analysis: A Total Strain Based Hysteretic Material Model for 2D Planar Reinforced Concrete Structures
  (View Abstract | View Presentation)

Harries, Kent A.

• High Rise Buildings - Session 1: DESIGN COMPRESSION FORCES FOR COUPLED WALL STRUCTURES
  (View Abstract)

Harris, Richard J.

• IStructE: International Structural Engineering I: Timber engineered for C21 Architecture
  (View Abstract)

Harrison, Ben F.

• Progressive Collapse: PROGRESSIVE COLLAPSE ANALYSIS AND RETROFIT DESIGN USING THE UNIFIED FACILITIES CRITERIA
  (View Abstract)

Hart, Gary C.

• Post Earthquake Investigation of Wood Buildings: PERFORMANCE OF DRYWALL SHEAR WALLS: UC IRVINE TESTS
  (View Abstract)

Harvey, David

• IStructE: International Structural Engineering 2: Bridge Design for Extreme Conditions
  (View Abstract)

Hasanzadeh, Javad

• Poster Session I: Analytical investigation of mixed BRBF and SCBF braced steel frames
  (View Abstract | View Presentation)

Haselton, Curt B.

• ATC-63 - Quantification of Building System Performance and Response Parameters: ATC 63 Methodology for Evaluating Seismic Collapse Safety of Archetype Buildings
  (View Abstract)
• Collapse Simulation of Structural Systems Subjected to Seismic Excitation in Engineering Practice: Comparing Seismic Collapse Safety of Modern and Existing Reinforced Concrete Frame Structures in California
  (View Abstract)
• ATC-63 - Quantification of Building System Performance and Response Parameters: Example Evaluation of the ATC-63 Methodology for Reinforced Concrete Special Moment Frame Buildings
  (View Abstract)

Hashash, Youssef M.

• NEES Projects: Predictor-Corrector Algorithm for Multi-site Hybrid Simulation
  (View Abstract | View Presentation)

Hashemi-Tari, Pooyan

• Design of Structures for Wind Using Computational Methods: Modeling of High Intensity Winds
  (View Abstract)

Haukaas, Terje

• Validation and Verification of Hybrid Simulation for Seismic Structural Response: HYBRID SIMULATION OF THE GRAVITY LOAD COLLAPSE OF REINFORCED CONCRETE FRAMES
  (View Abstract)

Hawkins, Neil M.

• Recent Advances in Shear Design for Reinforced Concrete: RECENT CHANGES TO CONCRETE SHEAR STRENGTH PROVISIONS OF AASHTO-LRFD BRIDGE DESIGN SPECIFICATION
  (View Abstract)

Hazra, Budhaditya

• Advances in Structural Control: Robust Adaptive Control of Nonlinear Base Isolated Buildings under Earthquake Excitations
  (View Abstract)

He, Zhijun

• Poster Session III: Analysis and Design of the Roof Structure of Table Tennis Gymnasium for the 2008 Olympic Games
  (View Abstract)

Healy, Jack C.

• Assessment and Evaluation of Building Components: Using Acoustic Emissions to detect damage in historic stone masonry
  (View Abstract)

Hedges, Keith E.

• Education of Structural Engineers - 2: How a Collaborative Architecture Influences Structural Engineering Education
  (View Abstract | View Presentation)

Heintz, Jon A.

• ATC-63 - Quantification of Building System Performance and Response Parameters: Overview and Key Concepts of the ATC-63 Methodology
  (View Abstract)

Helwig, Todd A.

• Practical Solutions for Stability and Bracing of Steel Frames: Effective Application of the AISC Stability Bracing Provisions
  (View Abstract)
• Practical Solutions for Stability and Bracing of Steel Frames: Stability Bracing of Beams by Shear Diaphragm
  (View Abstract)

Herold, Andreas

• Large Structures: Large Constructions and Bridge Abutments: Solutions with Geosynthetic Reinforced Earth
  (View Abstract)

Hewitt, Christopher M.

• Prequalified Moment Connections for Seismic Design of Steel Structures: The Latest Prequalification Standard for Special and Intermediate Steel Moment Frame Connections
  (View Abstract)
• Sustainability for Structural Engineers: Material Industry Perspectives: The Structural Engineer's Role in Selecting Sustainable Materials: The Steel Industry's Perspective
  (View Abstract)
• Developments in Connection Design Specifications and Approaches: Design of Conventional- and Extended- Single Plate Connections: AISC’s New Procedures
  (View Abstract)

Hindi, Riyadh A.

• Poster Session II: Compressive Stress-Strain Behavior of R/C Columns using Opposing Spirals
  (View Abstract)

Hindi, Riyadh

• Poster Session II: LIVE LOAD DISTRIBUTION FOR CAST IN PLACE BOX GIRDER BRIDGES
  (View Abstract)

Hines, Eric M.

• Train-Induced Vibrations in Buildings for Air-rights Developments: Predicting Train-Induced Vibrations in Multi-Story Buildings
  (View Abstract)

Hinman, Eve

• Extreme Loads: Air-blast failure criteria for columns using finite element methods
  (View Abstract)
• Innovative Methods for Blast and Progressive Collapse Mitigation: Performance-Based Techniques for Columns Subjected to Air Blast
  (View Abstract)

Hiramoto, Kazuhiko

• Advances in Structural Control: Vibration Tests of a Three Story Benchmark Structure with Power Generating Control Devices
  (View Abstract | View Presentation)

Hite, Monique C.

• Seismic Design of Bridges: Assessment of Seismic Retrofit Measures for Bridge Bearings
  (View Abstract | View Presentation)

Hodgson, Ian C.

• In-Service Monitoring of Bridges and High-Mast Light Towers: Field and Laboratory Studies on high-mast Lighting Towers in Iowa
  (View Abstract)

Hoehler, Matthew S.

• Connections and Detailing - 2: Ductility Requirements for the Anchorage of Nonstructural Components
  (View Abstract)

Holtermann, Tim

• Practical Solutions for Stability and Bracing of Steel Frames: Erection Bridging of Open-Web Steel Joists and Joist Girders
  (View Abstract | View Presentation)

Hong, Jong-Kook

• New MBMA/AISC Methods for Design of Metal Building Frames: Research on Cyclic Behavior and Design of Metal Buildings
  (View Abstract | View Presentation)
• Development of AISI Cold-Formed Steel Seismic Design Standards: Cyclic Testing and Modeling of Cold-Formed Steel─Special Bolted Moment Frame Connections
  (View Abstract | View Presentation)

Hong, Sangdo

• Fire Behavior and Design of Steel and Composite Structures: BEHAVIOR OF STEEL BUILDING STRUCTURES UNDER REALISTIC FIRE LOADING
  (View Abstract)

Hooper, John D.

• Pushing the Envelope in Material and Structural System Choice in High-Rise Buildings: One Rincon Hill: Raising the Bar
  (View Abstract)

Hortacsu, Ayse

• Post Earthquake Investigation of Wood Buildings: PERFORMANCE OF DRYWALL SHEAR WALLS: UC IRVINE TESTS
  (View Abstract)

Hoveidaee, Nader

• Poster Session I: Effect of Mid-Connection Detail of Cross Bracings on Elastic-Plastic Behavior of Braced System
  (View Abstract | View Presentation)

Howser, Rachel

• Recent Advances in Shear Design for Reinforced Concrete: Effect of Flexural Ductility on Shear Capacity
  (View Abstract)

Hsiao, Ling-en

• High Rise Buildings - Session 1: Structural Design Challenges for Plaza 66 Tower 2
  (View Abstract | View Presentation)
• Poster Session III: Design of an architectural roof lantern at top of plaza 66 tower 2
  (View Abstract)

Hsu, Kung-Chung

• Poster Session III: The accelerated method for estimating corrosion of reinforced concrete structure in seawater
  (View Abstract | View Presentation)

Hsu, Thomas T.C.

• Impact Tests for Constitutive Models Analysis and Computation: Cyclic Softened Membrane Model for Prestressed Concrete
  (View Abstract)

Hsu, Tsao-Hua

• Poster Session III: Research on the shrinkage deformation and crack development of high-strength high-performance concrete containing silica fume
  (View Abstract | View Presentation)

Huang, Chung-Ho

• Poster Session III: Production of Sintered Fine Sediment Lightweight Aggregate
  (View Abstract | View Presentation)

Huang, J.

• CSCE: The Confederation Bridge - The First 10 Years of Service: Structural Monitoring System for Assessing the Long-Term Behaviour of the Confederation Bridge
  (View Abstract)

Huang, Jun

• Monitoring of Bridges: Experimentally determined continuous displacement influence lines for bridges
  (View Abstract)

Hueste, Mary Beth D.

• General Seismic - Analysis: SEISMIC FRAGILITY ANALYSIS OF TYPICAL LOW- TO MID-RISE REINFORCED CONCRETE STRUCTURES
  (View Abstract | View Presentation)

Huffman, Sharlie

• Monitoring of Bridges: Seismic Monitoring of British Columbia Bridges
  (View Abstract | View Presentation)

Hughes, Michael F.

• Train-Induced Vibrations in Buildings for Air-rights Developments: Experimental Validation of Building Vibration Propagation Using a Four Story Laboratory Model
  (View Abstract)

Huntington, Craig G.

• Tensioned Fabric Structures - Case Studies: Structures Using Uncurved or Minimally Curved Tensioned Fabric Membranes
  (View Abstract)

Huo, Yili

• Performance-based Evaluation of Semi-Active and Passive Control Systems: Fragility Functions of Base Isolated Highway Bridges
  (View Abstract)

Husfeld, Rachel

• Performance-based Evaluation of Semi-Active and Passive Control Systems: Analytical evaluation of various passive isolation systems on the seismic performance of a low-cost Chilean masonry house
  (View Abstract | View Presentation)

I

Ibrahim, Hatem

• CSCE: Seismic Performance and Retrofit of buildings - a Canadian Perspective: Experimental Investigation of the Cyclic Behavior of Concrete Frame Joints Reinforced with Double-Headed Studs
  (View Abstract)
• CSCE: Seismic Performance and Retrofit of buildings - a Canadian Perspective: Steel Reinforced Polymers Enhance Strength and Ductility of Beam-Column Joints under Seismic Loads
  (View Abstract)

Ibrahim, Hisham H.

• Cable Stayed Bridge Design: The Golden Ears Bridge in Vancouver, BC
  (View Abstract)

Igusa, Takeru

• Damping in Buildings: Measurements, Uncertainty, and Application: Models for the median and variability of building damping based on basic building properties
  (View Abstract)

Ikerd, William F.

• BIM Technology, Crossing Design & Construction Team Boundaries: BIM Technology, Crossing Design & Construction Team Boundaries
  (View Abstract)

Imanpour, Ali

• Poster Session II: Numerical evaluation of through plate beam to box column connection
  (View Abstract | View Presentation)

Inaudi, D

• Structural Identification of Constructed Systems for Evaluation of Performance: Structural Identification of Constructed Systems: Experimental Considerations
  (View Abstract)

Ingratta, Tony

• Seismic Evaluation - Walls: Earthquake Simulator Testing and Evaluation of Suspended Ceilings: Standard and Alternate Perimeter Installations
  (View Abstract | View Presentation)

Inverso, George A.

• Poster Session III: Truss Analogy Analysis of Beam Seats for a Cut and Cover Tunnel
  (View Abstract)

Irwin, Peter A.

• Introduction to the new ASCE Technical Council on Wind Engineering: Cross-border Connections: Guideline Documents, Codes and Standards for Wind
  (View Abstract)
• High Rise Buildings - Session 2: Effects of Geometry on the Wind Response of Super-tall Towers
  (View Abstract)

Iulo, Lisa D.

• Sustainability for Structural Engineers: Strategies, Paradigms, and Measurement: Structural Testing of High Thermal Mass Walls Used in Sustainable Designs
  (View Abstract)

Izi, Ridvan

• CSCE: Seismic Performance and Retrofit of buildings - a Canadian Perspective: Steel Reinforced Polymers Enhance Strength and Ductility of Beam-Column Joints under Seismic Loads
  (View Abstract)

J

Jackson, Kevin

• High Rise Buildings - Session 1: Design of a Residential Tower on Top of an Existing Parking Garage
  (View Abstract | View Presentation)

Jacobi, Jim

• CASE Convocation Breakout Sessions: Staying Ahead of the Curve – Building Information Modeling (BIM)
  (View Abstract)
• CASE Convocation Breakout Sessions: Staying Ahead of the Curve – Building Information Modeling (BIM)
  (View Abstract)

Jain, Anurag

• Wind Engineering: Performance of Structural Systems in Recent Hurricanes
  (View Abstract)
• Post Earthquake Investigation of Wood Buildings: NONLINEAR ANALYSIS OF WOODFRAME SHEAR WALLS SUBJECTED TO SEISMIC LOADS
  (View Abstract | View Presentation)
• Post Earthquake Investigation of Wood Buildings: PERFORMANCE OF DRYWALL SHEAR WALLS: UC IRVINE TESTS
  (View Abstract)

Jan, Song F.

• Application of Finite Element Analysis for Design of Concrete Structures: Dynamic Nonlinear Finite element analysis of Blast Resistant concrete buildings in Petrochemical Facilities
  (View Abstract | View Presentation)

Janjic, Dorian

• Poster Session II: SOPHISTICATED NON-LINEAR 4D STRUCTURAL ANALYSIS FOR CABLE STAYED BRIDGES
  (View Abstract)
• Cable Stayed Bridge Design: SOFTWARE TOOL FOR WIND DESIGN OF CABLE STAYED BRIDGES
  (View Abstract)

Jauregui, David V.

• Concrete Bridges: Non-Destructive Strength Evaluation of a Continuous, Reinforced Concrete Slab Bridge
  (View Abstract | View Presentation)

Jerath, Sukhvarsh

• Poster Session II: Road Surface Roughness Generation by Power Spectral Density in Bridge Design
  (View Abstract)

Jhang, Chyuan

• Seismic Evaluation - Walls: Seismic Behavior of Low Yield Point Steel Plate Shear Walls
  (View Abstract)

Jimenez, Gabriel A.

• Building Façade: Durability Considerations in the Design of Stone Façades
  (View Abstract)

Johansson, Ola J.

• Pushing the Envelope in Material and Structural System Choice in High-Rise Buildings: One Rincon Hill: Raising the Bar
  (View Abstract)

Johnson, Art

• CASE Convocation Breakout Sessions: Ways to Make Your Life Easier and the World a Better Place: Scope, Contracts and Contract Document Tools
  (View Abstract)
• CASE Convocation Breakout Sessions: Ways to Make Your Life Easier and the World a Better Place: Scope, Contracts and Contract Document Tools
  (View Abstract)

Johnson, William

• Poster Session III: Behavior and Design of Steel-Plate Composite Walls
  (View Abstract | View Presentation)

Jones, Nicholas

• Introduction to the new ASCE Technical Council on Wind Engineering: Creation of the ASCE TCWE
  (View Abstract)

Jones, Nicholas P.

• Damping in Buildings: Measurements, Uncertainty, and Application: Models for the median and variability of building damping based on basic building properties
  (View Abstract)

Joseph, Leonard M.

• Seismic Design - Structural System: Seismic Design and Performance of the FedEx Airbus A380 Hangar Facility
  (View Abstract)

Juneja, Gunjeet

• Liquid-Containing Structures: Approximation for Seismic Analysis of Not-Flat-Bottom Axisymmetric Tanks
  (View Abstract)

K

Kaan, Benjamin

• Fatigue Enhancement of Steel Structures: Fatigue Enhancement of Welded Coverplates Using Carbon-Fiber Composites
  (View Abstract)

Kabeyasawa, Toshikazu

• Collapse Simulation of Structural Systems Subjected to Seismic Excitation in Engineering Practice: Input loss of the base motion in the dynamic collapse tests of three-story reinforced concrete buildings with swaying foundation
  (View Abstract)

Kabeyasawa, Toshimi

• Collapse Simulation of Structural Systems Subjected to Seismic Excitation in Engineering Practice: Input loss of the base motion in the dynamic collapse tests of three-story reinforced concrete buildings with swaying foundation
  (View Abstract)

Kabeyasawa, Toshinori

• Collapse Simulation of Structural Systems Subjected to Seismic Excitation in Engineering Practice: Input loss of the base motion in the dynamic collapse tests of three-story reinforced concrete buildings with swaying foundation
  (View Abstract)

KADDAH, Fouad

• Forensic Structural Engineering: Analyses of the reasons of Roissy Terminal 2E collapse in France using deterministic and reliability assessments
  (View Abstract | View Presentation)

Kaehler, Richard C.

• New MBMA/AISC Methods for Design of Metal Building Frames: Overview of the MBMA/AISC Design Guide – Frame Design Using Web-Tapered Members
  (View Abstract | View Presentation)

Kajiwara, Koichi

• Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Experiments on Dampers and Frame Subassemblies
  (View Abstract)

Kamara, Mahmoud E.

• Poster Session I: Fire and Concrete Structures
  (View Abstract)

Karinski, Yuri S.

• Development and Validation of Advanced Modeling Methods for High-Rate Loadings: Study of Soil-Structure Interaction Response to Nearby Explosions by Coupled 2D Godunov – Variational Difference Approach
  (View Abstract | View Presentation)

Kasai, Kazuhiko

• Collapse Simulation of Structural Systems Subjected to Seismic Excitation in Engineering Practice: Study of Building Collapse for Performance-Based Design Validation
  (View Abstract)
• Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Collapse Experiment on 4-Story Moment Frame
  (View Abstract)
• Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Experiments on Dampers and Frame Subassemblies
  (View Abstract)
• Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Experiments Utilizing Multipurpose Test-Bed
  (View Abstract)
• Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Part 2 – Collapse Simulation and Blind Analysis Contest
  (View Abstract)

Kasal, Bo

• Seismic Evaluation - Walls: Comparison of In-plane Lateral Load Resistance of Interior Steel Stud and Wood Stud Light-Frame Walls
  (View Abstract)

Keifer, Kurt A.

• Forensic Structural Engineering: Identifying Sampling Protocols for Forensic and Structural Evaluations of Existing Structures
  (View Abstract | View Presentation)

Keith, Edward L.

• What Makes a Wood Design a Good Design?: Full Scale 3D Wall Bracing Tests
  (View Abstract | View Presentation)
• Advances in Material Properties and Design: A PRINCIPLES OF MECHANICS METHOD FOR WOOD STRUCTURAL PANEL PORTAL FRAMES
  (View Abstract | View Presentation)
• Innovative Structural Systems: Development of A Structural Insulated Panel Standards
  (View Abstract)

Kelly, Brian

• Utilization of Non Destructive Testing (NDT) Methods in Structural Health Monitoring (SHM): Deterioration Rates for Bridge Components in New York
  (View Abstract)

keshavarzi, farhad

• Poster Session II: Numerical evaluation of through plate beam to box column connection
  (View Abstract | View Presentation)

Kestner, Dirk M.

• Sustainability for Structural Engineers: Strategies, Paradigms, and Measurement: A Status Update and Preview of the SEI Sustainability Committee’s Report "Sustainability for the Structural Engineer"
  (View Abstract)

Khafaf, Bardia

• Poster Session II: Numerical evaluation of through plate beam to box column connection
  (View Abstract | View Presentation)

Khandelwal, Kapil

• Progressive Collapse: Assessment of Progressive Collapse Residual Capacity using Pushdown Analysis
  (View Abstract)

Khavanin, Mohammad

• Poster Session III: ELASTOPLASTIC ANALYSIS AND DUCTILITY EVALUATION OF STEEL TUBULAR COLUMNS SUBJECTED TO CYCLIC LOADING
  (View Abstract | View Presentation)

Kijewski-Correa, Tracy L.

• Structural Identification of Constructed Systems for Evaluation of Performance: System Identification on Actual Buildings: Challenges and Opportunities Across Hazards
  (View Abstract | View Presentation)
• Damping in Buildings: Measurements, Uncertainty, and Application: Predictive Models for Damping in Buildings: The Role of Structural System Characteristics
  (View Abstract)

Kilzer, Ann

• Computational Aspects in Distance Education: Optimizing Resources in Undergraduate Research
  (View Abstract)

Kim, Jin-Woo J.

• Poster Session II: Behavior Characteristic of Hypar Shaped Space Truss with Removed Members
  (View Abstract)

Kim, Jongdae

• Design of Structures for Wind Using Computational Methods: Modeling of High Intensity Winds
  (View Abstract)

Kim, Yoon Duk

• New MBMA/AISC Methods for Design of Metal Building Frames: 2. Example Frame Design Using the New MBMA/AISC Guide to Design of Frames Using Web-Tapered Members
  (View Abstract)

King, J. Peter C.

• CSCE: The Confederation Bridge - The First 10 Years of Service: Wind Engineering for the Confederation Bridge
  (View Abstract)

Kircher, Charles A.

• ATC-63 - Quantification of Building System Performance and Response Parameters: ATC 63 Methodology for Evaluating Seismic Collapse Safety of Archetype Buildings
  (View Abstract)
• ATC-63 - Quantification of Building System Performance and Response Parameters: Overview and Key Concepts of the ATC-63 Methodology
  (View Abstract)

Kiremidjian, Anne

• Remote Sensing for Condition Assessment and Damage Identification: Wireless Structural Monitoring
  (View Abstract)

Kiremidjian, Garo

• Remote Sensing for Condition Assessment and Damage Identification: Wireless Structural Monitoring
  (View Abstract)

KIshiki, Shoichi

• Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Experiments Utilizing Multipurpose Test-Bed
  (View Abstract)

KITAMURA, Haruyuki

• Advances in Seismic Isolation Design Practice in the U.S. and Japan: Limit performance of Seismic Devices and Seismic Performance of Isolated Building in Long-period Ground Motion
  (View Abstract)

Kleinhans, Danielle D.

• Forensic Structural Engineering: Identifying Sampling Protocols for Forensic and Structural Evaluations of Existing Structures
  (View Abstract | View Presentation)

Klemencic, Ron

• Pushing the Envelope in Material and Structural System Choice in High-Rise Buildings: One Rincon Hill: Raising the Bar
  (View Abstract)

Klingner, Richard E.

• Masonry Veneer Research Evaluation and Design: NSF-NEES Project on "Performance-based Design of Masonry
  (View Abstract)

Klingner, Richard

• Masonry Veneer Research Evaluation and Design: Seismic Performance of Clay Masonry Veneer in Wood Stud Walls Subjected to In-Plane and Out-of-Plane Shaking
  (View Abstract | View Presentation)

Klingner, Richard E.

• Masonry Design and Evaluation: Overview of the 2008 Building Code Requirements and Specification for Masonry Structures
  (View Abstract)

Kmetz, Matt

• Innovative Methods for Blast and Progressive Collapse Mitigation: Blast Resistant Design using Advanced, State-of-the Art Materials
  (View Abstract | View Presentation)

Knight, Thomas P.

• Seismic Design - Structural System: INTEGRAL BRIDGES – DEVELOPMENT OF A CONSTITUTIVE SOIL MODEL FOR SOIL STRUCTURE INTERACTION
  (View Abstract | View Presentation)

Kodur, Venkatesh R.

• Design for Structural Fire Safety: Fire Performance of Reinforced Concrete Beams under Design Fire Exposures
  (View Abstract)

Kodur, Venkatesh

• Design for Structural Fire Safety: Structural performance of stud walls under normal and post-earthquake fire exposure
  (View Abstract)

Korista, Stan

• Pushing the Envelope in Material and Structural System Choice in High-Rise Buildings: Specifying High Performance Concrete for the Trump Tower Chicago
  (View Abstract)

Kostanic, Ivica

• Lessons from Recent Windstorms: Monitoring of Hurricane Wind Pressures and Wind Speeds on a Residential Home Roof With Wireless Instrumentation
  (View Abstract | View Presentation)

Krajewski, Joseph E.

• Bridge Case Studies: High Performance Redesign of the Sprague Street Bridge
  (View Abstract)

Krawinkler, Helmut

• Collapse Simulation of Structural Systems Subjected to Seismic Excitation in Engineering Practice: Reliability of a 4-story Steel Moment Resisting Frame against Collapse Due to Seismic Excitations
  (View Abstract)

Krisciunas, Raymond

• Timber Bridge Design Issues: Sioux Narrows Bridge-- Sensitive Replacement of a Heritage Timber Truss Bridge
  (View Abstract | View Presentation)

Krumpen, Robert P.

• Large Structures: Use of Chinese Steel for Heavy Industrial Projects
  (View Abstract | View Presentation)
• Practical Solutions for Stability and Bracing of Steel Frames: Use of Stability Braces in Floor Systems
  (View Abstract | View Presentation)

Kubodera, Isao

• Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Experiments Utilizing Multipurpose Test-Bed
  (View Abstract)

Kuchma, Daniel A.

• Recent Advances in Shear Design for Reinforced Concrete: RECENT CHANGES TO CONCRETE SHEAR STRENGTH PROVISIONS OF AASHTO-LRFD BRIDGE DESIGN SPECIFICATION
  (View Abstract)

Kuebitz, Karl C.

• Liquid-Containing Structures: Design Considerations for Large Prestressed Water Reservoirs
  (View Abstract | View Presentation)

Kuivanen, David P.

• What Makes a Wood Design a Good Design?: Importance of proper detailing on performance of wood assemblies exposed to environment
  (View Abstract)

Kulcsar, Frack

• Remote Sensing for Condition Assessment and Damage Identification: Remote Monitoring on Internal Condition of Buried Pipe Infrastructures
  (View Abstract)

Kunnath, Sashi

• Application of Finite Element Analysis for Seismic Design and Evaluation of Concrete Buildings: Modeling of Damaged Shear Walls for Post-Event Collapse Analysis
  (View Abstract)

Kurama, Yahya C.

• Connections and Detailing - 2: Behavior and Design of Anchorages for Unbonded PT Strands in Seismic Regions
  (View Abstract)

Kurokawa, Yuji

• Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Experiments Utilizing Multipurpose Test-Bed
  (View Abstract)

Kwon, Kihyon

• Fire Behavior and Design of Steel and Composite Structures: FIRE LOAD BEHAVIOR OF STEEL BUILDING COLUMNS WITH DAMAGED SPRAYED FIRE RESISTIVE MATERIAL
  (View Abstract)

L

L, Frank

• Poster Session I: Development of thick laminated wood plates using MPB wood
  (View Abstract)

Lagace, Scott

• Utilization of Non Destructive Testing (NDT) Methods in Structural Health Monitoring (SHM): Deterioration Rates for Bridge Components in New York
  (View Abstract)

Lai, Juin Wei

• New Developments in Concentrically Braced Frames for Seismic Design: Numerical modeling and performance assessment of concentrically braced steel frames
  (View Abstract)

Lam, Frank

• Connections and Detailing - 1: Design guideline for Rounded Dovetail Connections
  (View Abstract)
• Connections and Detailing - 1: Stability analysis of eccentrically loaded wood beam column
  (View Abstract | View Presentation)
• Contemporary Topics in Structural Engineering Practice and Education: Modelling Post-and-beam Wooden Buildings under Seismic Loads
  (View Abstract | View Presentation)

Lamont, Susan

• Fire Behavior and Design of Steel and Composite Structures: Performance Based Structural Fire Engineering for Modern Building Design
  (View Abstract | View Presentation)

Langlois, Sébastien

• Network Infrastructure Performance for Extreme Winds: Understanding How Overhead Lines Respond to Localized High Intensity Wind Storms
  (View Abstract | View Presentation)

Lara, Otton

• CSCE: Seismic Performance and Retrofit of buildings - a Canadian Perspective: Seismic Performance Of Gravity Load Designed Reinforced Concrete Frames With Unreinforced Masonry Infill Walls
  (View Abstract | View Presentation)

Larson, Daniel J.

• Industrial Facilities - Silos Tanks & Dams: Investigation and Repair of Ethanol Plant Mat Foundation Distress
  (View Abstract | View Presentation)

Larson, Debra

• Education of Structural Engineers - 1: Current Programs in American Post-Secondary Wood Design Education
  (View Abstract)

Laskar, A.

• Recent Advances in Shear Design for Reinforced Concrete: Effect of Flexural Ductility on Shear Capacity
  (View Abstract)

Laskar, Arghadeep

• Impact Tests for Constitutive Models Analysis and Computation: Cyclic Softened Membrane Model for Prestressed Concrete
  (View Abstract)

Lavan, Oren

• Seismic Evaluation - Walls: Earthquake Simulator Testing and Evaluation of Suspended Ceilings: Standard and Alternate Perimeter Installations
  (View Abstract | View Presentation)

Lavinder, Jeff A.

• Bridge Case Studies: Innovative Methods used in the Design and Construction of New Tacoma Narrows Bridge
  (View Abstract | View Presentation)

Lee, Byoung-Jun

• Extreme Loads: RESTRAINT MECHANISMS IN PRECAST CONCRETE DOUBLE TEE FLOOR SYSTEMS SUBJECTED TO FIRE LOADING
  (View Abstract)
• Fire Behavior and Design of Steel and Composite Structures: FIRE LOAD BEHAVIOR OF STEEL BUILDING COLUMNS WITH DAMAGED SPRAYED FIRE RESISTIVE MATERIAL
  (View Abstract)

Lee, Won K.

• Application of Finite Element Analysis for Seismic Design and Evaluation of Concrete Buildings: Simulation of Self-Centering Fiber-Reinforced Concrete Columns
  (View Abstract)

Lee, Yong-Hee

• Poster Session II: Behavior Characteristic of Hypar Shaped Space Truss with Removed Members
  (View Abstract)

Lehman, Dawn E.

• Application of Finite Element Analysis for Seismic Design and Evaluation of Concrete Buildings: Evaluation of Practical Methods for Analysis of Reinforced Concrete Walls
  (View Abstract)
• New Developments in Concentrically Braced Frames for Seismic Design: Improved seismic design of concentrically braced frames and gusset plate connections
  (View Abstract)

Lehman, Dawn

• New Developments in Concentrically Braced Frames for Seismic Design: Test of a full scale concentrically braced frame with multi-story X-bracing
  (View Abstract)

Lemay, Lionel

• Sustainability for Structural Engineers: Material Industry Perspectives: Sustainable High Performance Concrete Buildings
  (View Abstract | View Presentation)

Leo, Nicole

• Extreme Loads: RESTRAINT MECHANISMS IN PRECAST CONCRETE DOUBLE TEE FLOOR SYSTEMS SUBJECTED TO FIRE LOADING
  (View Abstract)
• Fire Behavior and Design of Steel and Composite Structures: FIRE LOAD BEHAVIOR OF STEEL BUILDING COLUMNS WITH DAMAGED SPRAYED FIRE RESISTIVE MATERIAL
  (View Abstract)

Leon, Roberto T.

• Advances in Structural Control: Analytical Study of SDOF Systems with Superelastic Shape Memory Alloy Properties
  (View Abstract | View Presentation)

Lew, H.S.

• Application of Finite Element Analysis for Seismic Design and Evaluation of Concrete Buildings: Modeling of Damaged Shear Walls for Post-Event Collapse Analysis
  (View Abstract)

Li, Boer

• Poster Session III: Static and seismic analysis of a single-tower concrete cable-stayed bridge
  (View Abstract)

Li, Chou-Hsien

• International Advances in Steel Plate Shear Walls 1: Research: Experimental Responses of Four 2-story Narrow Steel Plate Shear Walls
  (View Abstract)

Li, D.

• CSCE: The Confederation Bridge - The First 10 Years of Service: Thermal Response of the Confederation Bridge: Extreme Thermal Loading and Expansion Joint Movement
  (View Abstract)

Li, Minghao

• Contemporary Topics in Structural Engineering Practice and Education: Modelling Post-and-beam Wooden Buildings under Seismic Loads
  (View Abstract | View Presentation)

Li, Yue

• The Next Step for ASCE 16: Performance-Based Design of Wood Structures: Performance-Based Design for Wood Residential Construction Subjected to Snow Loads
  (View Abstract | View Presentation)

Liao, Hui-Wen

• Poster Session III: A New Testing Method for Fatigue of Reinforced Concrete Beam
  (No Abstract | View Presentation)

Licon-Lozano, Alicia

• Concrete Bridges: Non-Destructive Strength Evaluation of a Continuous, Reinforced Concrete Slab Bridge
  (View Abstract | View Presentation)

Liel, Abbie B.

• ATC-63 - Quantification of Building System Performance and Response Parameters: ATC 63 Methodology for Evaluating Seismic Collapse Safety of Archetype Buildings
  (View Abstract)
• Collapse Simulation of Structural Systems Subjected to Seismic Excitation in Engineering Practice: Comparing Seismic Collapse Safety of Modern and Existing Reinforced Concrete Frame Structures in California
  (View Abstract)
• ATC-63 - Quantification of Building System Performance and Response Parameters: Example Evaluation of the ATC-63 Methodology for Reinforced Concrete Special Moment Frame Buildings
  (View Abstract)

Liepins, Atis A.

• Liquid-Containing Structures: Approximation for Seismic Analysis of Not-Flat-Bottom Axisymmetric Tanks
  (View Abstract)

Lignos, Dimitrios

• Collapse Simulation of Structural Systems Subjected to Seismic Excitation in Engineering Practice: Reliability of a 4-story Steel Moment Resisting Frame against Collapse Due to Seismic Excitations
  (View Abstract)

Lilliu, Giovanna

• Application of Finite Element Analysis for Design of Concrete Structures: Applications of Finite Element Analysis to Concrete Dams
  (View Abstract)

Lin, Cheng-I

• Poster Session III: Production of Sintered Fine Sediment Lightweight Aggregate
  (View Abstract | View Presentation)

Lin, Pei-Yang

• Advances in Structural Control: Experimental Verification of Multiple MR Damper Control of a Three-Story SAC Structure
  (View Abstract | View Presentation)

Line, Phil

• The Next Step for ASCE 16: Performance-Based Design of Wood Structures: Performance Based Design of Wood Structures – Designing for Durability
  (View Abstract)

Liu, Haibin

• Network Infrastructure Performance for Extreme Winds: Estimating Electric Power Outages due to Hurricane and Ice Storms Using Spatial Generalized Linear Mixed Models
  (View Abstract)

Liu, Hongyan

• Performance-based Evaluation of Passive Control Systems: Seismic Performance Assessment of Woodframed Structures with Energy Dissipation Systems
  (View Abstract)
• The Next Step for ASCE 16: Performance-Based Design of Wood Structures: Tiered Approach to Performance-Based Seismic Design of Wood Frame Buildings
  (View Abstract | View Presentation)

Liu, Judy

• Poster Session II: ANALYTICAL INVESTIGATION OF STEEL SLIT PANELS FOR LATERAL RESISTANCE OF STEEL FRAME BUILDINGS
  (View Abstract | View Presentation)
• Poster Session II: Performance Evaluation of a Mechanically Fastened Fiber Reinforced Polymer Deck
  (View Abstract | View Presentation)
• NEES Projects: DESIGN AND ANALYTICAL VALIDATION OF POST-TENSIONED COLUMN BASES
  (View Abstract)

Liu, Mei Kuen

• Advances in Software Development for Structural Engineering Applications: Implementation of Building Information Modeling (BIM) on the Renovation of the Art Gallery of Alberta in Edmonton, Alberta
  (View Abstract)

Liu, Ruifen

• System Performance Optimization - Minimizing Annual Loss, Minimizing Life-Cycle Costs and Maximizing Performance Reliability: EVALUATION OF SEISMIC ENERGY IN INELASTIC STRUCTURES WITH RIGID-END OFFSETS
  (View Abstract | View Presentation)

Liu, Te Hung

• Poster Session III: A New Testing Method for Fatigue of Reinforced Concrete Beam
  (No Abstract | View Presentation)

Liu, Yu Wen

• Poster Session III: Relation between Porosity and Compressive Strength of Slag Concrete
  (View Abstract | View Presentation)

Lloyd, David H.

• Concrete Bridges: Developments in Australasia in Precast Concrete Bridge beam Technology
  (View Abstract | View Presentation)

Loh, Chin-Hsiung

• Advances in Structural Control: Experimental Verification of Multiple MR Damper Control of a Three-Story SAC Structure
  (View Abstract | View Presentation)

Lombardi, Nicolas

• Poster Session II: Performance Evaluation of a Mechanically Fastened Fiber Reinforced Polymer Deck
  (View Abstract | View Presentation)

Lombardo, Franklin T.

• Lessons from Recent Windstorms: Investigation of Thunderstorm Winds on an Instrumented Building
  (View Abstract | View Presentation)
• Wind or Water? (Separating Wind and Storm-Surge Damage in Hurricanes): Constructing Probable Wind and Water Damage Sequences from Timelines – the Technical Perspective
  (View Abstract)

Louter, Christian

• Poster Session II: Reinforced glass beams; Effect of increased temperatures on the glass-to-reinforcement adhesive bond
  (View Abstract)
• Assessment and Evaluation of Building Components: CABLE-STAYED FACADE STRUCTURE WITH WELDED BOROSILICATE GLASS TUBES
  (View Abstract)

Love, R. Jay

• International Advances in Steel Plate Shear Walls 2: Design Codes and Applications: Retrofit of a Critical Care Facility in Los Angeles with Steel Plate Shear Walls
  (View Abstract)

Lowes, Laura N.

• Application of Finite Element Analysis for Seismic Design and Evaluation of Concrete Buildings: Evaluation of Practical Methods for Analysis of Reinforced Concrete Walls
  (View Abstract)
• International Advances in Steel Plate Shear Walls 1: Research: Research Needs and Future Directions for Steel Plate Shear Walls
  (View Abstract)

Lubell, Adam S.

• Advances in Material Properties and Design: Behavior of Concrete Deep Beams with High Strength Reinforcement
  (View Abstract)
• Recent Advances in Shear Design for Reinforced Concrete: One-Way Shear in Wide Concrete Beams with Narrow Supports
  (View Abstract)

Lucero, Ramon E.

• Liquid-Containing Structures: Design Considerations for Large Prestressed Water Reservoirs
  (View Abstract | View Presentation)

Lynch, Jerome P.

• Utilization of Non Destructive Testing (NDT) Methods in Structural Health Monitoring (SHM): Distributed Model Updating in Smart Wireless Monitoring Systems
  (View Abstract)

M

Macfarlane, Tim G.

• IStructE: International Structural Engineering I: Exploring the Limits of Structural Glass Assemblies
  (View Abstract)

Maes, M. A.

• CSCE: The Confederation Bridge - The First 10 Years of Service: Thermal Response of the Confederation Bridge: Extreme Thermal Loading and Expansion Joint Movement
  (View Abstract)

Magellanes, Joseph

• Innovative Methods for Blast and Progressive Collapse Mitigation: RETROFIT OF MASONRY WALLS TO ENHANCE THEIR BLAST RESISTANCE
  (View Abstract)

Mahin, Stephen A.

• Advances in Seismic Isolation Design Practice in the U.S. and Japan: Introduction to NEESTIPS: Tools for Isolation and Protective Systems
  (View Abstract | View Presentation)
• Performance-based Evaluation of Passive Control Systems: Satisfying Drift and Acceleration Criteria with Multi-Stage Friction Pendulum Isolation Systems
  (View Abstract)
• New Developments in Concentrically Braced Frames for Seismic Design: Numerical modeling and performance assessment of concentrically braced steel frames
  (View Abstract)

Maison, Bruce F.

• Collapse Simulation of Structural Systems Subjected to Seismic Excitation in Engineering Practice: Study of Building Collapse for Performance-Based Design Validation
  (View Abstract)

Majmudar, Radhi A.

• Poster Session II: How Architectural and Engineering Companies Can Capture the Global Advantage
  (View Abstract)

Malushte, Sanjeev

• Poster Session III: Behavior and Design of Steel-Plate Composite Walls
  (View Abstract | View Presentation)

Manbeck, Harvey B.

• Seismic Evaluation - Walls: Comparison of In-plane Lateral Load Resistance of Interior Steel Stud and Wood Stud Light-Frame Walls
  (View Abstract)

Mangus, Alfred R.

• Poster Session II: More Operational Movable Bridges Utilizing Orthotropic Bridge Decks
  (View Abstract | View Presentation)
• Poster Session II: Twenty-Five Icons of Orthotropic Steel Deck Bridge Engineering
  (View Abstract | View Presentation)

Manley, Bonnie

• Development of AISI Cold-Formed Steel Seismic Design Standards: Overview of the Standard for Seismic Design of Cold-Formed Steel Structural Systems–Special Bolted Moment Frames
  (View Abstract)

Manuel, Lance

• Risk, Reliability, and Safety in the Offshore Environment: Reliability Analysis and Design Procedures for Offshore Wind Turbines
  (View Abstract)

Marchand, Kirk A.

• Progressive Collapse: Unified Progressive Collapse Design Requirements for DOD and GSA
  (View Abstract)

Marchant, David

• In-Service Monitoring of Bridges and High-Mast Light Towers: Utilization of Strong Motion Accelerometers for Real Time Monitoring of Structural Properties
  (View Abstract)

Maria, Garlock

• Design for Structural Fire Safety: Modeling High-Rise Steel Framed Buildings Under Fire
  (View Abstract)

Marjanishvili, Shalva

• Extreme Loads: Air-blast failure criteria for columns using finite element methods
  (View Abstract)
• Impact Tests for Constitutive Models Analysis and Computation: Single Degree of Freedom Characterization of Impact Load on Continuous Systems
  (View Abstract | View Presentation)

Martin, Éric

• International Advances in Steel Plate Shear Walls 2: Design Codes and Applications: SPSW Application for the Rehabilitation of Seismically Deficient Reinforced Concrete Building
  (View Abstract | View Presentation)

Martin, Zeno A.

• What Makes a Wood Design a Good Design?: Full Scale 3D Wall Bracing Tests
  (View Abstract | View Presentation)
• Advances in Material Properties and Design: A PRINCIPLES OF MECHANICS METHOD FOR WOOD STRUCTURAL PANEL PORTAL FRAMES
  (View Abstract | View Presentation)

Marvel, Lonnie

• Poster Session II: Compressive Stress-Strain Behavior of R/C Columns using Opposing Spirals
  (View Abstract)

Marzahn, Gero A.

• Bridge Design and Rehabilitation: Strengthening of Orthotropic Steel Bridge Decks by SPS Technology
  (View Abstract)

Maschke, Ken R.

• High Rise Buildings - Session 1: Design of a Residential Tower on Top of an Existing Parking Garage
  (View Abstract | View Presentation)
• Education of Structural Engineers - 2: Engineers Teaching Structural Principles to Architecture Students
  (View Abstract | View Presentation)

Masri, Sami

• Structural Identification of Constructed Systems for Evaluation of Performance: A Review of Structural Identification for Bridge Structures
  (View Abstract)

Masui, Takeshi

• Poster Session I: Vertical Vibration Isolation Device using Constant Load Supporting Mechanism
  (View Abstract)

Matamoros, Adolfo

• Fatigue Enhancement of Steel Structures: Fatigue Enhancement of Welded Coverplates Using Carbon-Fiber Composites
  (View Abstract)

Matsumori, Taizo

• Collapse Simulation of Structural Systems Subjected to Seismic Excitation in Engineering Practice: Input loss of the base motion in the dynamic collapse tests of three-story reinforced concrete buildings with swaying foundation
  (View Abstract)

Matsuoka, Taichi

• Advances in Structural Control: Vibration Tests of a Three Story Benchmark Structure with Power Generating Control Devices
  (View Abstract | View Presentation)

Matsuoka, Yuichi

• Seismic Evaluation - Walls: Evaluation of Non-structural Partition Walls and Suspended Ceiling Systems through a Shake Table Study
  (View Abstract)
• Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Collapse Experiment on 4-Story Moment Frame
  (View Abstract)
• Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Experiments Utilizing Multipurpose Test-Bed
  (View Abstract)
• Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Part 2 – Collapse Simulation and Blind Analysis Contest
  (View Abstract)

Mayes, Ronald L.

• Advances in Seismic Isolation Design Practice in the U.S. and Japan: An Innovative Application of Base Isolation Technology
  (View Abstract)

McClure, Ghyslaine

• Network Infrastructure Performance for Extreme Winds: Understanding How Overhead Lines Respond to Localized High Intensity Wind Storms
  (View Abstract | View Presentation)

McCormick, Jason P.

• Seismic Evaluation - Walls: Evaluation of Non-structural Partition Walls and Suspended Ceiling Systems through a Shake Table Study
  (View Abstract)
• Validation and Verification of Hybrid Simulation for Seismic Structural Response: Verification test of a hybrid test system with distributed column base tests
  (View Abstract | View Presentation)

McDonald, Brian

• Post Earthquake Investigation of Wood Buildings: Woodframe Seismic Response Analysis – Benchmarking with Buildings Damaged During the Northridge Earthquake
  (View Abstract)

McGinley, William M.

• Masonry Veneer Research Evaluation and Design: Seismic Masonry Veneer: Quasi- Static Testing of Wood Stud Backed Clay Masonry Veneer Walls
  (View Abstract | View Presentation)

McGinnis, Michael

• High Rise Buildings - Session 1: ANALYTICAL INVESTIGATION OF THE INFLUENCE OF COLUMN SIZE ON THE FIRE LOAD BEHAVIOR OF STEEL BUILDING COLUMNS
  (View Abstract)

McGormley, Jonathan C.

• IABSE: Recent Developments in International Bridge and Structural Engineering Part 2: Lessons Learned From Catastrophic Failures Of Bridges
  (View Abstract)

McKenna, Frank

• Advances in Software Development for Structural Engineering Applications: Nonlinear Structural Analysis Using Software Design Patterns
  (View Abstract)

McMullin, Kurt M.

• Post Earthquake Investigation of Wood Buildings: Gypsum Wall Damage Investigation
  (View Abstract)

Memari, Ali M.

• Seismic Evaluation - Walls: Comparison of In-plane Lateral Load Resistance of Interior Steel Stud and Wood Stud Light-Frame Walls
  (View Abstract)
• Sustainability for Structural Engineers: Strategies, Paradigms, and Measurement: Structural Testing of High Thermal Mass Walls Used in Sustainable Designs
  (View Abstract)

Mencarelli, Andrea

• Impact Tests for Constitutive Models Analysis and Computation: Lattice Discrete Particle Model (LDPM) for Fracture Dynamics and Rate Effect in Concrete.
  (View Abstract | View Presentation)

Merrick, Dan S.

• Post Earthquake Investigation of Wood Buildings: Gypsum Wall Damage Investigation
  (View Abstract)

Methner, Raphael

• Poster Session II: Foundation variations for Integral Bridges
  (View Abstract | View Presentation)

Meyboom, Joost

• IABSE: Recent Developments in International Bridge and Structural Engineering Part 2: The Liulin Bridge - A Cable Supported Bridge In The People's Republic Of China
  (View Abstract)

Michel, Bruneau

• International Advances in Steel Plate Shear Walls 2: Design Codes and Applications: Steel Plate Shear Walls in the Upcoming 2010 AISC Seismic Provisions and 2009 Canadian Standard S16
  (View Abstract)

Midorikawa, Mitsumasa

• Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Experiments Utilizing Multipurpose Test-Bed
  (View Abstract)

Miller, Craig

• Network Infrastructure Performance for Extreme Winds: Modeling and prediction of failure of transmission lines due to high intensity winds
  (View Abstract)

Miller, Gregory R.

• The Use of Mathcad, Matlab, and other Applications and Technology in Teaching Advanced Structural Analysis: A Multifaceted Approach to Introductory Structural Analysis Instruction
  (View Abstract | View Presentation)

Mirghaderi, Rasoul

• Poster Session II: Numerical evaluation of through plate beam to box column connection
  (View Abstract | View Presentation)

Mirghaderi, S.Rasoul

• Poster Session III: Reducing beam section by corrugated webs for developing a connection of specially moment resisting frame
  (View Abstract)

Mirzakashani, Mehrdad

• Bridge Case Studies: Demolition of the Grace Memorial and Silas N. Pearman Bridges over Cooper River, South Carolina, USA – A Case Study
  (View Abstract)

Mittendorf, Kim E.

• Risk, Reliability, and Safety in the Offshore Environment: Joint Distributions for Wind and Waves for the Design of Offshore Wind Energy Converters
  (View Abstract)

Miyamoto, Kit

• Prequalified Moment Connections for Seismic Design of Steel Structures: Design of a new steel moment frame building using ASCE 7 provisions
  (View Abstract | View Presentation)

Mo, Y.L.

• Recent Advances in Shear Design for Reinforced Concrete: Effect of Flexural Ductility on Shear Capacity
  (View Abstract)
• Impact Tests for Constitutive Models Analysis and Computation: Cyclic Softened Membrane Model for Prestressed Concrete
  (View Abstract)

Moghadam, Hasan

• Poster Session I: The Effect of Soil-Structure Interaction in 14-story Building Retrofitting Project of National Housing and Land Organization
  (View Abstract)

Moghaddam, Hasan

• Poster Session II: Behavior and modeling of concrete columns confined by external post-tensioned strips
  (View Abstract)
• Poster Session II: RC members strengthening by using post-tensioned metal strips
  (View Abstract)

Mohaghegh, Mike

• Education of Structural Engineers - 2: UW/Boeing Certificate Programs in Aircraft Structures Education
  (View Abstract)

Mohebbi, Saiid

• Poster Session II: Behavior and modeling of concrete columns confined by external post-tensioned strips
  (View Abstract)
• Poster Session II: RC members strengthening by using post-tensioned metal strips
  (View Abstract)

Montalva, Arturo

• Extreme Loads: Air-blast failure criteria for columns using finite element methods
  (View Abstract)
• Impact Tests for Constitutive Models Analysis and Computation: Single Degree of Freedom Characterization of Impact Load on Continuous Systems
  (View Abstract | View Presentation)

Moon, Franklin

• Structural Identification of Constructed Systems for Evaluation of Performance: An Integrated Approach by the ASCE Committee
  (View Abstract)

Moore, James A.

• Train-Induced Vibrations in Buildings for Air-rights Developments: Experimental Validation of Building Vibration Propagation Using a Four Story Laboratory Model
  (View Abstract)

Moore, Mark E.

• Bridge Case Studies: Structural Condition Assessment of the Herbert C. Bonner Bridge in Dare County, North Carolina
  (View Abstract | View Presentation)

Morcous, George

• Forensic Structural Engineering: Forensic Investigation of a Bridge Construction Scaffolding Collapse
  (View Abstract | View Presentation)

Morgan, Troy A.

• Performance-based Evaluation of Passive Control Systems: Satisfying Drift and Acceleration Criteria with Multi-Stage Friction Pendulum Isolation Systems
  (View Abstract)

MORI, Nobuyuki

• Advances in Seismic Isolation Design Practice in the U.S. and Japan: Application Seismic Isolation to Japan's building; Retro-fitting and Middle story isolation
  (View Abstract)

Mori, Nobuyuki

• IABSE: Recent Developments in International Bridge and Structural Engineering Part 2: Seismic Design For The Sustainable City: A Report On Japanese Practice
  (View Abstract)

Morrill, Kenneth

• Innovative Methods for Blast and Progressive Collapse Mitigation: RETROFIT OF MASONRY WALLS TO ENHANCE THEIR BLAST RESISTANCE
  (View Abstract)

Morris, Paul

• The Next Step for ASCE 16: Performance-Based Design of Wood Structures: Performance Based Design of Wood Structures – Designing for Durability
  (View Abstract)

Morse-Fortier, Leonard J.

• What Makes a Wood Design a Good Design?: Problems with the Partially Engineered House
  (View Abstract | View Presentation)

Mosqueda, Gilberto

• Advances in Seismic Isolation Design Practice in the U.S. and Japan: Introduction to NEESTIPS: Tools for Isolation and Protective Systems
  (View Abstract | View Presentation)
• Validation and Verification of Hybrid Simulation for Seismic Structural Response: Assessment of Numerical and Experimental Errors in Hybrid Simulation
  (View Abstract)
• Validation and Verification of Hybrid Simulation for Seismic Structural Response: VERIFICATION OF HYBRID SIMULATION THROUGH ON-LINE MONITORING OF EXPERIMENTAL ERRORS
  (View Abstract)

Motoyui, Shojiro

• Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Experiments on Dampers and Frame Subassemblies
  (View Abstract)

Muehlbauer, Christian

• Poster Session II: Joining of Ultra High Performance Concrete (UHPC) Units by Gluing
  (View Abstract | View Presentation)

Mueller, Keith

• Pushing the Envelope in Material and Structural System Choice in High-Rise Buildings: Waterview Tower: Finding the Right High-Strength Concrete Mix
  (View Abstract)

Muir, Larry S.

• Developments in Connection Design Specifications and Approaches: Design of Bracing Connections
  (View Abstract)

Muir, Samuel J.

• CASE Risk Management Spring Convocation Plenary Session 2: Do Different Types of Clients Pose Different Types of Risks?
  (View Abstract)

Mullen, Chris

• Forensic Structural Engineering: Design Parameters Governing Post-Damage Stability of Low Rise
  (View Abstract)

Munshi, Javeed

• Liquid-Containing Structures: Design of Environmental Engineering Concrete Structures Based on Strain Limit and Crack Control
  (View Abstract)
• Industrial Facilities - Silos Tanks & Dams: Seismic Design of Reinforced Concrete Chimneys
  (View Abstract)
• Assessment and Evaluation of Building Components: Detailing Evaluation of Existing Structures
  (View Abstract)

Murakami, Katsuhide

• Advances in Seismic Isolation Design Practice in the U.S. and Japan: Application Seismic Isolation to Japan's building; Retro-fitting and Middle story isolation
  (View Abstract)

Murga, Gaizka

• Large Structures: An enclosure for the European Extremely Large Telescope
  (View Abstract | View Presentation)

Muthuramalingam, Jayakumar

• Impact Tests for Constitutive Models Analysis and Computation: Numerical Analysis of High Strength Concrete Columns Subjected to Wave Impact Loads and Eccentric compression
  (View Abstract | View Presentation)

N

Nair, R. Shankar

• Pushing the Envelope in Material and Structural System Choice in High-Rise Buildings: Waterview Tower: Finding the Right High-Strength Concrete Mix
  (View Abstract)

Nakashima, Masayoshi

• Seismic Evaluation - Walls: Evaluation of Non-structural Partition Walls and Suspended Ceiling Systems through a Shake Table Study
  (View Abstract)
• Validation and Verification of Hybrid Simulation for Seismic Structural Response: Verification test of a hybrid test system with distributed column base tests
  (View Abstract | View Presentation)

Nakata, Yuki

• Poster Session III: A study on hysteretic characteristic of Arc-shaped damper
  (View Abstract | View Presentation)

Narasimhan, Sriram

• Advances in Structural Control: Robust Adaptive Control of Nonlinear Base Isolated Buildings under Earthquake Excitations
  (View Abstract)

Nassif, Hani H.

• Structural Reliability in Design Practice: Development of a Bridge Live Load Model for Serviceability Limit States
  (View Abstract | View Presentation)

Nawari, Nawari O.

• Poster Session III: The Role of Data Mining Techniques in the Prediction of Hurricane Damages
  (View Abstract | View Presentation)

Nehdi, Moncef

• Connections and Detailing - 1: Shear Capacity of FRP Stirrups in FRP-Reinforced Concrete Beams Based on Genetic Algorithms Approach
  (View Abstract)

Nelson, Sam W.

• What Makes a Wood Design a Good Design?: A Proposed Design Method for Wood Piles used in Residential Construction
  (View Abstract)

Neves, Luis C.

• System Performance Optimization - Minimizing Annual Loss, Minimizing Life-Cycle Costs and Maximizing Performance Reliability: Structural Performance Optimization with Conflicting Objectives under Uncertainty
  (View Abstract)

Newhook, J. P.

• CSCE: The Confederation Bridge - The First 10 Years of Service: Structural Monitoring System for Assessing the Long-Term Behaviour of the Confederation Bridge
  (View Abstract)

Newhouse, Charles D.

• Concrete Bridges: The Effect of Temperature on the Effective Prestressing Force at Release for PCBT Girders
  (View Abstract | View Presentation)

Nguyen, Cuong

• Progressive Collapse: Progressive Collapse Analysis of a Steel Building with Pre-Northridge Moment Connections
  (View Abstract | View Presentation)

Nielson, Bryant G.

• Seismic Design of Bridges: Which ground motion intensity measure is most appropriate for conditioning demand models for bridge portfolios?
  (View Abstract)
• Existing Buildings - Codes / Standards / Evaluation and Rehabilitation: PROBABILISTIC DESCRIPTIONS OF ROOF TO TOP PLATE CONNECTIONS IN LIGHT FRAME WOOD STRUCTURES
  (View Abstract)

Noorzad, Asadollah

• Poster Session III: Dynamic response of pile groups embedded in transversely isotropic Media subjected to vertical and horizontal loads using hybrid numerical methods
  (View Abstract)

Norman, Charles R.

• Wind Engineering: Wind Driven Rain Forces on Buildings and Structures
  (View Abstract | View Presentation)
• Poster Session III: Damage Assessment of Homes and Building from an Engineering Point of View
  (View Abstract)

Nugent, William J.

• IABSE: Recent Developments in International Bridge and Structural Engineering Part 2: Lessons Learned From Catastrophic Failures Of Bridges
  (View Abstract)

O

O, James

• Glass Structures: An All Glass Cube in New York City
  (View Abstract)

O, Michael J.

• Extreme Loads: Mathmatical Simulation of 50- Year Snow Drift Loads
  (View Abstract)

Ofelia Moroni, Maria

• Performance-based Evaluation of Semi-Active and Passive Control Systems: Analytical evaluation of various passive isolation systems on the seismic performance of a low-cost Chilean masonry house
  (View Abstract | View Presentation)

Ogorzalek, Ken

• Poster Session III: A Structural Damage Detection Method Based On Subset Selection and Evolutionary Computation
  (View Abstract | View Presentation)

Ohsaki, Makoto

• Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Part 2 – Collapse Simulation and Blind Analysis Contest
  (View Abstract)

Ohuchi, Hajime

• Poster Session III: A study on hysteretic characteristic of Arc-shaped damper
  (View Abstract | View Presentation)

Okail, Hussein

• Masonry Veneer Research Evaluation and Design: Seismic Performance of Clay Masonry Veneer in Wood Stud Walls Subjected to In-Plane and Out-of-Plane Shaking
  (View Abstract | View Presentation)

Okasha, Nader

• Extreme Loads: RESTRAINT MECHANISMS IN PRECAST CONCRETE DOUBLE TEE FLOOR SYSTEMS SUBJECTED TO FIRE LOADING
  (View Abstract)

Okazaki, Taichiro

• International Advances in Steel Plate Shear Walls 1: Research: Research Needs and Future Directions for Steel Plate Shear Walls
  (View Abstract)

Oliva, Michael G.

• Timber Bridge Design Issues: Feasibility of rehabilitating timber bridges using mechanically fastened FRP strips
  (View Abstract)

Ooki, Yoji

• Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Experiments on Dampers and Frame Subassemblies
  (View Abstract)

Osteraas, John D.

• Post Earthquake Investigation of Wood Buildings: Woodframe Seismic Response Analysis – Benchmarking with Buildings Damaged During the Northridge Earthquake
  (View Abstract)

Oswald, Charles J.

• Blast Resistant Buildings in Petrochemcial Facilities: Update to Response Criteria for Blast Resistant Buildings in Petrochemical Facilities
  (View Abstract)

Overbay, Shannon

• Computational Aspects in Distance Education: Optimizing Resources in Undergraduate Research
  (View Abstract)

Ozbulut, Osman E.

• System Performance Optimization - Minimizing Annual Loss, Minimizing Life-Cycle Costs and Maximizing Performance Reliability: Optimization of Multiple Shape Memory Alloy Devices by a Genetic Algorithm for Seismic Response of a Tall Structure
  (View Abstract | View Presentation)

P

P. Mamaghani, Iraj H.

• Contemporary Topics in Structural Engineering Practice and Education: CYCLIC ELASTOPLASTIC ANALYSIS AND STABILITY EVALUATION OF STEEL BRACES OF HOLLOW SECTION
  (View Abstract | View Presentation)
• Poster Session III: ELASTOPLASTIC ANALYSIS AND DUCTILITY EVALUATION OF STEEL TUBULAR COLUMNS SUBJECTED TO CYCLIC LOADING
  (View Abstract | View Presentation)

Padgett, Jamie E.

• Seismic Design of Bridges: Which ground motion intensity measure is most appropriate for conditioning demand models for bridge portfolios?
  (View Abstract)
• Performance-based Evaluation of Passive Control Systems: Seismic Performance Assessment of a Passive Control Technology for Bridges using Shape Memory Alloys
  (View Abstract)

Pan, Huang-Hsing

• Poster Session III: The accelerated method for estimating corrosion of reinforced concrete structure in seawater
  (View Abstract | View Presentation)

Pan, Peng

• Seismic Evaluation - Walls: Evaluation of Non-structural Partition Walls and Suspended Ceiling Systems through a Shake Table Study
  (View Abstract)

Panahshahi, Nader

• In-Service Monitoring of Bridges and High-Mast Light Towers: Experienced gained and lessons learned from an extensive bridge monitoring research project
  (View Abstract)

Pandey, Mahesh

• Advances in Structural Control: Robust Adaptive Control of Nonlinear Base Isolated Buildings under Earthquake Excitations
  (View Abstract)

Pang, Weichiang

• The Next Step for ASCE 16: Performance-Based Design of Wood Structures: Tiered Approach to Performance-Based Seismic Design of Wood Frame Buildings
  (View Abstract | View Presentation)

Paret, Terrence F.

• Existing Buildings - Codes / Standards / Evaluation and Rehabilitation: ASCE-31 and ASCE-41: What Good Are They?
  (View Abstract)
• Existing Buildings - Codes / Standards / Evaluation and Rehabilitation: IS THE INTERNATIONAL EXISTING BUILDING CODE MORALLY DEFENSIBLE
  (View Abstract)

Parker, James C.

• CASE Convocation Breakout Sessions: Risks Associated with the Latest Structural Engineering Software
  (View Abstract)
• CASE Convocation Breakout Sessions: Risks Associated with the Latest Structural Engineering Software
  (View Abstract)

Paulson, Conrad

• Existing Buildings - Codes / Standards / Evaluation and Rehabilitation: Application of Contemporary Structural Building Codes to Antiquated Materials
  (View Abstract)

Pei, Shiling

• The Next Step for ASCE 16: Performance-Based Design of Wood Structures: Tiered Approach to Performance-Based Seismic Design of Wood Frame Buildings
  (View Abstract | View Presentation)

Pelessone, Daniele

• Development and Validation of Advanced Modeling Methods for High-Rate Loadings: Dynamic Pull-out Test Simulations through the Lattice Discrete Particle Model (LDPM)
  (View Abstract | View Presentation)
• Impact Tests for Constitutive Models Analysis and Computation: Lattice Discrete Particle Model (LDPM) for Fracture Dynamics and Rate Effect in Concrete.
  (View Abstract | View Presentation)

Peng, Hsien-Sheng

• Poster Session III: Production of Sintered Fine Sediment Lightweight Aggregate
  (View Abstract | View Presentation)

Peraza, David B.

• Progressive Collapse: Evaluation of Building with Severe Impact Damage: The Banker's Trust Building
  (View Abstract)

Peronto, John L.

• Seismic Design - Structural System: Seismic Design and Performance of the FedEx Airbus A380 Hangar Facility
  (View Abstract)

Pessiki, Stephen

• High Rise Buildings - Session 1: ANALYTICAL INVESTIGATION OF THE INFLUENCE OF COLUMN SIZE ON THE FIRE LOAD BEHAVIOR OF STEEL BUILDING COLUMNS
  (View Abstract)
• Extreme Loads: RESTRAINT MECHANISMS IN PRECAST CONCRETE DOUBLE TEE FLOOR SYSTEMS SUBJECTED TO FIRE LOADING
  (View Abstract)
• Fire Behavior and Design of Steel and Composite Structures: FIRE LOAD BEHAVIOR OF STEEL BUILDING COLUMNS WITH DAMAGED SPRAYED FIRE RESISTIVE MATERIAL
  (View Abstract)

Pezeshk, Shahram

• System Performance Optimization - Minimizing Annual Loss, Minimizing Life-Cycle Costs and Maximizing Performance Reliability: Automated Risk-Based Design Method for Optimal Structural and Non-Structural System Performance
  (View Abstract | View Presentation)

Phan, Long T.

• Design for Structural Fire Safety: Effects of Elevated Temperature Exposures on Mechanical Properties of HSC
  (View Abstract)

Phelps, Adam R.

• Computational Aspects in Distance Education: Integration of New Teaching Methodologies into a Laboratory Based Course
  (View Abstract | View Presentation)

Pierce, Phillip

• Timber Bridge Design Issues: FHWA's Covered Bridge Manual Focused on Engineering and Construction
  (View Abstract | View Presentation)

Pilakoutas, Kypros

• Poster Session II: Behavior and modeling of concrete columns confined by external post-tensioned strips
  (View Abstract)
• Poster Session II: RC members strengthening by using post-tensioned metal strips
  (View Abstract)

Pinelli, Jean-Paul

• Lessons from Recent Windstorms: Impact of the 2004 Hurricane Season on the Florida Public Hurricane Loss Model
  (View Abstract | View Presentation)
• Lessons from Recent Windstorms: Monitoring of Hurricane Wind Pressures and Wind Speeds on a Residential Home Roof With Wireless Instrumentation
  (View Abstract | View Presentation)

Pita, Gonzalo

• Lessons from Recent Windstorms: Impact of the 2004 Hurricane Season on the Florida Public Hurricane Loss Model
  (View Abstract | View Presentation)

Plank, Roger

• IStructE: International Structural Engineering 2: Comparative studies of the structural fire engineering design of steel and composite building structures
  (View Abstract)

Poon, Dennis

• High Rise Buildings - Session 1: Structural Design Challenges for Plaza 66 Tower 2
  (View Abstract | View Presentation)
• Poster Session III: Design of an architectural roof lantern at top of plaza 66 tower 2
  (View Abstract)

Poulos, Thomas D.

• Seismic Design - Structural System: Seismic Design and Performance of the FedEx Airbus A380 Hangar Facility
  (View Abstract)

Powell, Jacob

• New Developments in Concentrically Braced Frames for Seismic Design: Test of a full scale concentrically braced frame with multi-story X-bracing
  (View Abstract)

Prasad, Kuldeep

• Fire Behavior and Design of Steel and Composite Structures: BEHAVIOR OF STEEL BUILDING STRUCTURES UNDER REALISTIC FIRE LOADING
  (View Abstract)
• Fire Behavior and Design of Steel and Composite Structures: Experimental Study on the Behavior of Composite Steel Frame Subjected to Fire
  (View Abstract)

Prevatt, David O.

• Existing Buildings - Codes / Standards / Evaluation and Rehabilitation: PROBABILISTIC DESCRIPTIONS OF ROOF TO TOP PLATE CONNECTIONS IN LIGHT FRAME WOOD STRUCTURES
  (View Abstract)

Prieto-Portar, Luis A.

• Innovative Structural Systems: The Performance of Large-Scale Joint-less Reinforced Concrete Five-sided Boxes
  (View Abstract)

Prinaris, Andrew

• Remote Sensing for Condition Assessment and Damage Identification: Review of Remote Sensing for Condition Assessment and Damage Identification after Extreme Loading Conditions
  (View Abstract)

Prisco, Viviana

• Poster Session II: NONLINEAR ANALYSIS FOR PROGRESSIVE COLLAPSE INVESTIGATIONS ON R.C. FRAMED STRUCTURES
  (View Abstract | View Presentation)

Purasinghe, Rupa

• Progressive Collapse: Progressive Collapse Analysis of a Steel Building with Pre-Northridge Moment Connections
  (View Abstract | View Presentation)

Q

Qu, Bing

• International Advances in Steel Plate Shear Walls 1: Research: Behavior and Design of Intermediate HBE in Steel Plate Shear Walls
  (View Abstract)

Quiring, Steven

• Network Infrastructure Performance for Extreme Winds: Estimating Power Outages During Hurricanes Using Semi-Parametric Statistical Methods
  (View Abstract)

R

Radojevic, Dusan

• Cable Stayed Bridge Design: The Golden Ears Bridge in Vancouver, BC
  (View Abstract)

Radolli, Reno

• Timber Bridge Design Issues: Sioux Narrows Bridge-- Sensitive Replacement of a Heritage Timber Truss Bridge
  (View Abstract | View Presentation)

Rakowski, Michael

• In-Service Monitoring of Bridges and High-Mast Light Towers: Results of In-Service Monitoring of a Sample of Typical Highway Bridges
  (View Abstract | View Presentation)

Ramalingam, Krishnamurthy

• Remote Sensing for Condition Assessment and Damage Identification: Remote Monitoring on Internal Condition of Buried Pipe Infrastructures
  (View Abstract)

Ramirez, Julio A.

• Recent Advances in Shear Design for Reinforced Concrete: Size and Scale Effects on the Shear Strength of Concrete Beams
  (View Abstract)

Rammer, Douglas R.

• Timber Bridge Design Issues: Feasibility of rehabilitating timber bridges using mechanically fastened FRP strips
  (View Abstract)

Rangan, B. Vijaya

• Impact Tests for Constitutive Models Analysis and Computation: Numerical Analysis of High Strength Concrete Columns Subjected to Wave Impact Loads and Eccentric compression
  (View Abstract | View Presentation)

Rangaraju, Prasad R.

• Poster Session I: Preliminary Findings in the Development of Quantitative Tools for Assessing in situ Strength of Prestressed Concrete Structures Subjected to Fire
  (View Abstract | View Presentation)

Rankin, Dane S.

• Pushing the Envelope in Material and Structural System Choice in High-Rise Buildings: Specifying High Performance Concrete for the Trump Tower Chicago
  (View Abstract)

RAPHAEL, Wassim

• Forensic Structural Engineering: Analyses of the reasons of Roissy Terminal 2E collapse in France using deterministic and reliability assessments
  (View Abstract | View Presentation)

Rassati, Gian A.

• High Rise Buildings - Session 2: Axial Restraint in Diagonally Reinforced Concrete Coupling Beams: An Analytical Investigation
  (View Abstract | View Presentation)

Reed, Dorothy A.

• Network Infrastructure Performance for Extreme Winds: Networked Infrastructure Performance for the 2006 Hanukkah Eve Winter Storm
  (View Abstract)

Reinhorn, Andrei

• Seismic Evaluation - Walls: Earthquake Simulator Testing and Evaluation of Suspended Ceilings: Standard and Alternate Perimeter Installations
  (View Abstract | View Presentation)
• Poster Session I: ALGORITHM FOR OPTIMAL DESIGN OF ADJACENT BUILDINGS CONNECTED BY FLUID VISCOUS DEVICES
  (View Abstract | View Presentation)

Resta, Ferruccio

• Poster Session I: Active Control in a High-Rise Building under Multidirectional Wind Loads
  (View Abstract | View Presentation)

Restelli, Stefano

• Structural Robustness and Redundancy: On Structural Robustness, Redundancy and Static Indeterminacy
  (View Abstract)

Rezai, Mahmoud

• Steel Shear Wall Systems-Recent Experimental and Analytical Studies: Seismic Loading Behavior of Thin Steel Plate Walls
  (View Abstract)

Ricles, James M.

• NEES Projects: Real-time Hybrid Testing Using an Unconditionally Stable Explicit Integration Algorithm
  (View Abstract)

Rini, Darlene

• Fire Behavior and Design of Steel and Composite Structures: Performance Based Structural Fire Engineering for Modern Building Design
  (View Abstract | View Presentation)

Riveros, Guillermo A.

• Application of Finite Element Analysis for Design of Concrete Structures: DESIGN BY ANALYSIS OF INNOVATIVE NAVIGATION STRUCTURES
  (View Abstract)

Roberts, John M.

• IStructE: International Structural Engineering 2: The Brighton i360 Viewing Tower project
  (View Abstract)

Rodrigues, Nicolas J.

• High Rise Buildings - Session 2: Design of the Tallest Reinforced Concrete Structure on the West Coast
  (View Abstract)

Rodriguez, Santiago

• Structural Elegance: The Role of Aesthetics in Bridge Design
  (View Abstract)

Rodríguez-Vera, Rita

• Poster Session II: Performance Evaluation of a Mechanically Fastened Fiber Reinforced Polymer Deck
  (View Abstract | View Presentation)

Roeder, Charles W.

• New Developments in Concentrically Braced Frames for Seismic Design: Improved seismic design of concentrically braced frames and gusset plate connections
  (View Abstract)

Roeder, Charles

• New Developments in Concentrically Braced Frames for Seismic Design: Test of a full scale concentrically braced frame with multi-story X-bracing
  (View Abstract)

Rogier, Jan

• Network Infrastructure Performance for Extreme Winds: Understanding How Overhead Lines Respond to Localized High Intensity Wind Storms
  (View Abstract | View Presentation)

Rohloff, Warren A.

• Building Façade: Water Penetration of Debris-Impacted Residential Wall Cladding Systems
  (View Abstract)

Rojas, Hugo A.

• System Performance Optimization - Minimizing Annual Loss, Minimizing Life-Cycle Costs and Maximizing Performance Reliability: Automated Risk-Based Design Method for Optimal Structural and Non-Structural System Performance
  (View Abstract | View Presentation)

Rolfe, Stanley

• Fatigue Enhancement of Steel Structures: Fatigue Enhancement of Welded Coverplates Using Carbon-Fiber Composites
  (View Abstract)

Ronald, Hugh D.

• Bridge Design and Rehabilitation: A System for Rapid Precast Deck Construction
  (View Abstract | View Presentation)

Roorda, Derrick D.

• High Rise Buildings - Session 2: Design of the Tallest Reinforced Concrete Structure on the West Coast
  (View Abstract)
• Advances in Software Development for Structural Engineering Applications: Implementation of Building Information Modeling (BIM) on the Renovation of the Art Gallery of Alberta in Edmonton, Alberta
  (View Abstract)

Roschke, Paul N.

• Advances in Structural Control: Experimental Verification of Multiple MR Damper Control of a Three-Story SAC Structure
  (View Abstract | View Presentation)
• Advances in Structural Control: Vibration Tests of a Three Story Benchmark Structure with Power Generating Control Devices
  (View Abstract | View Presentation)
• Performance-based Evaluation of Semi-Active and Passive Control Systems: Analytical evaluation of various passive isolation systems on the seismic performance of a low-cost Chilean masonry house
  (View Abstract | View Presentation)
• System Performance Optimization - Minimizing Annual Loss, Minimizing Life-Cycle Costs and Maximizing Performance Reliability: Optimization of Multiple Shape Memory Alloy Devices by a Genetic Algorithm for Seismic Response of a Tall Structure
  (View Abstract | View Presentation)

Rosowsky, David V.

• The Next Step for ASCE 16: Performance-Based Design of Wood Structures: Tiered Approach to Performance-Based Seismic Design of Wood Frame Buildings
  (View Abstract | View Presentation)

Roy, Sougata

• Fatigue Enhancement of Steel Structures: Assessment of the Fatigue Threshold of Welded Details subjected to Post-Weld Ultrasonic Impact Treatment
  (View Abstract)

Rozelman, Stella

• Remote Sensing for Condition Assessment and Damage Identification: Remote Monitoring on Internal Condition of Buried Pipe Infrastructures
  (View Abstract)

Ryan, Keri L.

• Advances in Seismic Isolation Design Practice in the U.S. and Japan: Introduction to NEESTIPS: Tools for Isolation and Protective Systems
  (View Abstract | View Presentation)
• Performance-based Evaluation of Passive Control Systems: Evaluating Performance in Seismic Isolated Buildings using Performance Indexes
  (View Abstract | View Presentation)

S

Sabelli, Rafael

• International Advances in Steel Plate Shear Walls 2: Design Codes and Applications: Steel Plate Shear Walls in the Upcoming 2010 AISC Seismic Provisions and 2009 Canadian Standard S16
  (View Abstract)
• International Advances in Steel Plate Shear Walls 1: Research: Research Needs and Future Directions for Steel Plate Shear Walls
  (View Abstract)

Sabouri-Ghomi, Saeid

• Steel Shear Wall Systems-Recent Experimental and Analytical Studies: Tests of Two Three-Story Ductile Steel Plate Shear Walls
  (View Abstract)

Safadoust, Javad

• Poster Session III: Comparison of Two Dimensional Nonlinear Analysis of Integral Abutment Bridge and Simply Supported Bridge under Near Fault Earthquake Loading
  (View Abstract)

Samadi, Maysam

• Poster Session II: Behavior and modeling of concrete columns confined by external post-tensioned strips
  (View Abstract)
• Poster Session II: RC members strengthening by using post-tensioned metal strips
  (View Abstract)

Samuelson, David L.

• 2006 SJI Standard Specification for the Design of Composite Steel Joists, Cj-Series - A New Specification and Catalog for the Design Professional: An Introduction to Composite Steel Joists – Research and Behavior
  (View Abstract | View Presentation)

Sanayei, Masoud

• Train-Induced Vibrations in Buildings for Air-rights Developments: Experimental Validation of Building Vibration Propagation Using a Four Story Laboratory Model
  (View Abstract)
• Train-Induced Vibrations in Buildings for Air-rights Developments: Predicting Train-Induced Vibrations in Multi-Story Buildings
  (View Abstract)

Sander, Heiner

• Large Structures: Large Constructions and Bridge Abutments: Solutions with Geosynthetic Reinforced Earth
  (View Abstract)

Santamont, Kristin

• Practical Solutions for Stability and Bracing of Steel Frames: Use of Stability Braces in Floor Systems
  (View Abstract | View Presentation)

SARI, ALI

• Blast Resistant Buildings in Petrochemcial Facilities: Blast Response of Portable Buildings in Petrochemical Facilities
  (View Abstract)
• Risk, Reliability, and Safety in the Offshore Environment: Risk Assessment of Offshore Structures to Blast Loading
  (View Abstract)

Sasani, Mehrdad

• Progressive Collapse Competition: Progressive Collapse Resistance Competition (PCRC)
  (View Abstract)

Sato, Atsushi

• Development of AISI Cold-Formed Steel Seismic Design Standards: Cyclic Testing and Modeling of Cold-Formed Steel─Special Bolted Moment Frame Connections
  (View Abstract | View Presentation)
• Development of AISI Cold-Formed Steel Seismic Design Standards: Establishment of Capacity Design Requirements for Cold-Formed Steel─Special Bolted Moment Frames
  (View Abstract | View Presentation)

Sato, Eiji

• Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Collapse Experiment on 4-Story Moment Frame
  (View Abstract)
• Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Experiments on Dampers and Frame Subassemblies
  (View Abstract)

Savory, Eric

• Network Infrastructure Performance for Extreme Winds: Modeling and prediction of failure of transmission lines due to high intensity winds
  (View Abstract)

Sayani, Prayag

• Performance-based Evaluation of Passive Control Systems: Evaluating Performance in Seismic Isolated Buildings using Performance Indexes
  (View Abstract | View Presentation)

Schiff, Scott D.

• Connections and Detailing - 1: Horizontal Joint Reinforcement Requirements for Brick Veneer in Seismic Design Categories E and F
  (View Abstract)
• Poster Session I: Preliminary Findings in the Development of Quantitative Tools for Assessing in situ Strength of Prestressed Concrete Structures Subjected to Fire
  (View Abstract | View Presentation)
• Building Façade: Height Restrictions for Brick Veneer with Wood Frame Backing
  (View Abstract)
• Building Façade: Water Penetration of Debris-Impacted Residential Wall Cladding Systems
  (View Abstract)

Schmidt, Mark K.

• Building Façade: Dormant Curtain Wall Anchors: Relative Stiffness & Underdesign
  (View Abstract | View Presentation)

Schneermann, Michael

• Large Structures: An enclosure for the European Extremely Large Telescope
  (View Abstract | View Presentation)

Schorer, Alyssa E.

• Timber Bridge Design Issues: Feasibility of rehabilitating timber bridges using mechanically fastened FRP strips
  (View Abstract)

Schreppers, Gerd-Jan

• Application of Finite Element Analysis for Design of Concrete Structures: Applications of Finite Element Analysis to Concrete Dams
  (View Abstract)

Scollard, Chris R.

• Cable Stayed Bridge Design: The Canada Line Extradosed Transit Bridge
  (View Abstract)

Scott, Michael H.

• Advances in Software Development for Structural Engineering Applications: Extensions of OpenSees for Bridge Management Applications
  (View Abstract)
• Advances in Software Development for Structural Engineering Applications: Nonlinear Structural Analysis Using Software Design Patterns
  (View Abstract)

Scott, Thomas

• Design of Structures for Wind Using Computational Methods: Pulp CFD: Hollywood, the Elephant, and the Acronym
  (View Abstract)

Searer, Gary R.

• Existing Buildings - Codes / Standards / Evaluation and Rehabilitation: ASCE-31 and ASCE-41: What Good Are They?
  (View Abstract)
• Existing Buildings - Codes / Standards / Evaluation and Rehabilitation: IS THE INTERNATIONAL EXISTING BUILDING CODE MORALLY DEFENSIBLE
  (View Abstract)

Sgambelluri, Marcello

• CASE Convocation Breakout Sessions: Staying Ahead of the Curve – Building Information Modeling (BIM)
  (View Abstract)
• CASE Convocation Breakout Sessions: Staying Ahead of the Curve – Building Information Modeling (BIM)
  (View Abstract)

Shaeffer, Ronald

• Structural Elegance: The Life and Works of Eero Saarinen
  (View Abstract)

Shahbodagh Khan, Babak

• Poster Session III: Dynamic response of pile groups embedded in transversely isotropic Media subjected to vertical and horizontal loads using hybrid numerical methods
  (View Abstract)

Shahrooz, Bahram M.

• High Rise Buildings - Session 1: DESIGN COMPRESSION FORCES FOR COUPLED WALL STRUCTURES
  (View Abstract)

Shan, Wenxiao

• Tensioned Fabric Structures - Case Studies: Snow Induced Ponding of Toyota Pavilion Canopy, Montage Mountain, PA
  (View Abstract)

Shanmugam, Bagyalakshmi

• Existing Buildings - Codes / Standards / Evaluation and Rehabilitation: PROBABILISTIC DESCRIPTIONS OF ROOF TO TOP PLATE CONNECTIONS IN LIGHT FRAME WOOD STRUCTURES
  (View Abstract)

Sharff, Phillip A.

• Poster Session I: Crack Propagation Evaluation of Polymer Composite FRP Panels Subjected to Static and Cyclic Loading
  (View Abstract)

Shea, David K.

• Glass Structures: Glass Bearing Walls
  (View Abstract)

Sheen, Yeong Nain

• Poster Session III: Relation between Porosity and Compressive Strength of Slag Concrete
  (View Abstract | View Presentation)

Shenton III, Harry W.

• In-Service Monitoring of Bridges and High-Mast Light Towers: Results of In-Service Monitoring of a Sample of Typical Highway Bridges
  (View Abstract | View Presentation)
• Advances in Material Properties and Design: Thermal and Creep Characteristics of Bio-Based Composite Beams
  (View Abstract | View Presentation)
• Monitoring of Bridges: Experimentally determined continuous displacement influence lines for bridges
  (View Abstract)

Sherman, William C.

• Liquid-Containing Structures: Controversial Issues in Seismic Design of Liquid-Containing Structures
  (View Abstract | View Presentation)

SHI, Yongjiu

• Steel Shear Wall Systems-Recent Experimental and Analytical Studies: Lateral Stiffness of Steel Shear Wall Systems
  (View Abstract)

Shimabata, Tsuguhiro

• Poster Session III: A study on hysteretic characteristic of Arc-shaped damper
  (View Abstract | View Presentation)

Shimada, Isao

• Poster Session III: A study on hysteretic characteristic of Arc-shaped damper
  (View Abstract | View Presentation)

Shin, Moochul

• Seismic Design of Bridges: Seismic Retrofit of Bridge Columns using Innovative Wrapping Technique
  (View Abstract)

Shinde, Jayesh K.

• Performance-based Evaluation of Passive Control Systems: Seismic Performance Assessment of Woodframed Structures with Energy Dissipation Systems
  (View Abstract)

Shing, P. Benson

• Masonry Veneer Research Evaluation and Design: Seismic Performance of Clay Masonry Veneer in Wood Stud Walls Subjected to In-Plane and Out-of-Plane Shaking
  (View Abstract | View Presentation)

Shook, David A.

• Advances in Structural Control: Experimental Verification of Multiple MR Damper Control of a Three-Story SAC Structure
  (View Abstract | View Presentation)

Silva, John F.

• Connections and Detailing - 2: Ductility Requirements for the Anchorage of Nonstructural Components
  (View Abstract)
• Connections and Detailing - 1: Toward a Unified Approach to Anchorage in Reinforced Concrete Design
  (View Abstract)

Simsir, Can C.

• Post Earthquake Investigation of Wood Buildings: NONLINEAR ANALYSIS OF WOODFRAME SHEAR WALLS SUBJECTED TO SEISMIC LOADS
  (View Abstract | View Presentation)
• Post Earthquake Investigation of Wood Buildings: PERFORMANCE OF DRYWALL SHEAR WALLS: UC IRVINE TESTS
  (View Abstract)

Singer, Eric L.

• CASE Convocation Breakout Sessions: Construction Administration as a Risk Management Tool
  (View Abstract | View Presentation)

Singh, Sarbjeet

• Bridge Case Studies: Demolition of the Grace Memorial and Silas N. Pearman Bridges over Cooper River, South Carolina, USA – A Case Study
  (View Abstract)

Sinn, Robert C.

• Pushing the Envelope in Material and Structural System Choice in High-Rise Buildings: Specifying High Performance Concrete for the Trump Tower Chicago
  (View Abstract)

Sipple, Jesse

• Train-Induced Vibrations in Buildings for Air-rights Developments: Long-Term Thermal Performance of a CFRP-Reinforced Bridge Deck
  (View Abstract | View Presentation)

Sivaprakasam, Balaji

• Cable Stayed Bridge Design: Wadi Abdoun Bridge - Jordan
  (View Abstract)

Skaggs, Thomas D.

• What Makes a Wood Design a Good Design?: Full Scale 3D Wall Bracing Tests
  (View Abstract | View Presentation)
• Advances in Material Properties and Design: A PRINCIPLES OF MECHANICS METHOD FOR WOOD STRUCTURAL PANEL PORTAL FRAMES
  (View Abstract | View Presentation)

Slattery, Kerry T.

• Application of Finite Element Analysis for Design of Concrete Structures: DESIGN BY ANALYSIS OF INNOVATIVE NAVIGATION STRUCTURES
  (View Abstract)

Sliger, Laura

• Computational Aspects in Distance Education: Integration of New Teaching Methodologies into a Laboratory Based Course
  (View Abstract | View Presentation)

Smith, Douglas A.

• Lessons from Recent Windstorms: Investigation of Thunderstorm Winds on an Instrumented Building
  (View Abstract | View Presentation)
• Wind or Water? (Separating Wind and Storm-Surge Damage in Hurricanes): Constructing Probable Wind and Water Damage Sequences from Timelines – the Technical Perspective
  (View Abstract)
• Wind or Water? (Separating Wind and Storm-Surge Damage in Hurricanes): Use of Emerging Remote-Sensing Technologies to Determine Neighborhood Wind/Water Damage Patterns
  (View Abstract)

Smith, Ian F.

• Structural Identification of Constructed Systems for Evaluation of Performance: Analytical Modeling and Parameter Identification
  (View Abstract)

Smith, Joseph

• Innovative Methods for Blast and Progressive Collapse Mitigation: Agent-Based Simulation of Human Movements During Emergency Evacuations of Facilities
  (View Abstract)

Smith, Matthew P.

• Poster Session III: Truss Analogy Analysis of Beam Seats for a Cut and Cover Tunnel
  (View Abstract)

Sneed, Lesley H.

• Recent Advances in Shear Design for Reinforced Concrete: Size and Scale Effects on the Shear Strength of Concrete Beams
  (View Abstract)

So, Migeum

• General Seismic - Analysis: A Total Strain Based Hysteretic Material Model for 2D Planar Reinforced Concrete Structures
  (View Abstract | View Presentation)

Sobhan, Mohammad Saeid

• Poster Session III: Reducing beam section by corrugated webs for developing a connection of specially moment resisting frame
  (View Abstract)

SOBRINO, JUAN A.

• IABSE: Recent Developments in International Bridge and Structural Engineering Part 1: Bridges In Urban And Metropolitan Areas: A Spanish Perspective
  (View Abstract)

Sohn, Hoon

• Structural Identification of Constructed Systems for Evaluation of Performance: A Review of Structural Identification for Bridge Structures
  (View Abstract)

Song, Junho

• General Seismic - Analysis: Ductility Capacity Models for Buckling-Restrained Braces using a Bayesian Methodology
  (View Abstract | View Presentation)

Song, Wei

• Poster Session III: A Structural Damage Detection Method Based On Subset Selection and Evolutionary Computation
  (View Abstract | View Presentation)

Song, Xiaobin

• Connections and Detailing - 1: Stability analysis of eccentrically loaded wood beam column
  (View Abstract | View Presentation)

Sonmez, Mustafa

• Contemporary Topics in Structural Engineering Practice and Education: SOLUTION TECHNIQUES FOR NONLINEAR EQUILIBRIUM EQUATIONS
  (View Abstract)

Sorsky, Harald

• Poster Session II: SOPHISTICATED NON-LINEAR 4D STRUCTURAL ANALYSIS FOR CABLE STAYED BRIDGES
  (View Abstract)

Sotelino, Elisa D.

• Advances in Software Development for Structural Engineering Applications: A New Parallel Structural Analysis Framework
  (View Abstract)

Speicher, Matthew S.

• Advances in Structural Control: Analytical Study of SDOF Systems with Superelastic Shape Memory Alloy Properties
  (View Abstract | View Presentation)

Spencer, Quiel E.

• Design for Structural Fire Safety: Modeling High-Rise Steel Framed Buildings Under Fire
  (View Abstract)

Spoth, Tom P.

• Bridge Case Studies: Innovative Methods used in the Design and Construction of New Tacoma Narrows Bridge
  (View Abstract | View Presentation)

Srinivasan, Gopal

• IStructE: International Structural Engineering I: Concrete Bridges Form and Function: Sungai Prai Bridge, Malaysia
  (View Abstract)

Srinivasan, S.

• IStructE: International Structural Engineering I: Concrete Bridges Form and Function: Sungai Prai Bridge, Malaysia
  (View Abstract)

Srivastava, Siddharth

• Seismic Design of Bridges: Assessment of Seismic Retrofit Measures for Bridge Bearings
  (View Abstract | View Presentation)

Stadler, Robert

• Seismic Design - Structural System: Seismic Design and Performance of the FedEx Airbus A380 Hangar Facility
  (View Abstract)

Stampler, Johann

• Cable Stayed Bridge Design: SOFTWARE TOOL FOR WIND DESIGN OF CABLE STAYED BRIDGES
  (View Abstract)

Starossek, Uwe

• Structural Robustness and Redundancy: Avoiding Disproportionate Collapse in High-Rise Buildings
  (View Abstract | View Presentation)
• Structural Robustness and Redundancy: Measures of Structural Robustness -- Requirements and Applications
  (View Abstract | View Presentation)

Stathopoulos, Ted

• Introduction to the new ASCE Technical Council on Wind Engineering: Cross-border Wind Engineering Contributions: ASCE 7 - A Case-in-point
  (View Abstract)
• Design of Structures for Wind Using Computational Methods: Field and wind tunnel experiments to evaluate wind-induced cladding and structural loads on a low wooden building
  (View Abstract)

Steckel, Bob

• 2006 SJI Standard Specification for the Design of Composite Steel Joists, Cj-Series - A New Specification and Catalog for the Design Professional: 2006 SJI Standard Specification for the Design of Composite Steel Joists, CJ-Series -- A New Specification and Catalog for the Design Professional
  (View Abstract)

Steed, Bradford A.

• Remote Sensing for Condition Assessment and Damage Identification: Assessing Damage of a Reinforced Concrete Structural Element using System Identification
  (View Abstract)

Stephens, Sutton F.

• Education of Structural Engineers - 1: Faculty Lead Study Abroad: Wood Engineering in Sweden
  (View Abstract)

Stevens, David J.

• Progressive Collapse: Unified Progressive Collapse Design Requirements for DOD and GSA
  (View Abstract)

Stojadinovic, Bozidar

• Validation and Verification of Hybrid Simulation for Seismic Structural Response: VERIFICATION OF HYBRID SIMULATION THROUGH ON-LINE MONITORING OF EXPERIMENTAL ERRORS
  (View Abstract)

Struckland, Timothy J.

• Advances in Material Properties and Design: Thermal and Creep Characteristics of Bio-Based Composite Beams
  (View Abstract | View Presentation)

Suarez, Thomas

• Pushing the Envelope in Material and Structural System Choice in High-Rise Buildings: Waterview Tower: Finding the Right High-Strength Concrete Mix
  (View Abstract)